Difference between revisions of "Packet radio"

From RevSpace
Jump to navigation Jump to search
Line 8: Line 8:
 
}}
 
}}
  
Fiddling with packet radio. The idea is to have a node/repeater/bbs/etc on 27mc. At revspace and at [[Flok]]'s house (in Gouda).
+
Tsja, 1200 baud...
  
  
 
== Networking ==
 
== Networking ==
  
Currently the rpi is connected to a gl-inet (owned by [[Flok]]). The gl-inet is a repeater for revspace-pub. The gl-inet has a port-forward to the rpi.
+
Currently the rpi is connected to a gl-inet (owned by [[Flok]]). The gl-inet is a client for revspace-pub. The gl-inet has a port-forward to the rpi.
  
 
IP address of the gl-inet: 10.42.43.253.
 
IP address of the gl-inet: 10.42.43.253.
Line 37: Line 37:
  
 
==Todo==
 
==Todo==
* 5/8 golf antenne op sparkshack2
 
** Antenne, tegelvoet met tegels en kabels al in huis
 
 
** Anti-kabelsalade keuze: installatiekast
 
** Anti-kabelsalade keuze: installatiekast
 
*** Hier een mooie aan uit knop op voor als de zender uit moet (maar rpi aan mag blijven)
 
*** Hier een mooie aan uit knop op voor als de zender uit moet (maar rpi aan mag blijven)
Line 45: Line 43:
 
** APRS iGate: send all incoming aprs packets to [http://www.cbaprs.de/ cbaprs.de]
 
** APRS iGate: send all incoming aprs packets to [http://www.cbaprs.de/ cbaprs.de]
 
*** Direwolf sound card tnc?
 
*** Direwolf sound card tnc?
** BBS: fully featured BBS for chat/latest hacker news
+
** MQTT gateway rx/tx

Revision as of 23:45, 13 March 2016

Project Packet radio
hoe meer elektromagnetische velden, hoe meer vreugd
Status In progress
Contact Flok420, Maxell, Crashjuh
Last Update 2016-03-13

Tsja, 1200 baud...


Networking

Currently the rpi is connected to a gl-inet (owned by Flok). The gl-inet is a client for revspace-pub. The gl-inet has a port-forward to the rpi.

IP address of the gl-inet: 10.42.43.253.

MAC address of the gl-inet: e4:95:6e:40:2c:34

MAC address of the raspberry pi: b8:27:eb:2b:a2:f9

The RPI can be accessed from RevRadio2 via IP address 172.19.0.9 - this IP address is part of the liberreto TINC vpn mesh network.



Hardware

We have an TNC-PI which is a TNC connected to a Raspberry Pi interfaced to a Midland Alan 48 plus (27 MHz) radio. Every five (5) minutes it sends out a beacon of information about the setup and the request to report back any receptions. Any incoming packets are being logged to the disk. If an incoming packet appears to be an APRS packet, it should get digipeated.


settings for radio

Instellingen alan48+.jpg


Todo

    • Anti-kabelsalade keuze: installatiekast
      • Hier een mooie aan uit knop op voor als de zender uit moet (maar rpi aan mag blijven)
  • Add functionality
    • APRS iGate: send all incoming aprs packets to cbaprs.de
      • Direwolf sound card tnc?
    • MQTT gateway rx/tx