Difference between revisions of "Packet radio"

From RevSpace
Jump to navigation Jump to search
m (Todo/ideas/plans)
Line 14: Line 14:
 
Increase range: setup the antenna on the roof. This requires some metalwork since our initial antenna-mount is full.
 
Increase range: setup the antenna on the roof. This requires some metalwork since our initial antenna-mount is full.
 
* Add functionality
 
* Add functionality
** APRS iGate: send all incoming aprs packets to [http://www.cbaprs.de/]
+
** APRS iGate: send all incoming aprs packets to [http://www.cbaprs.de/ cbaprs.de]
 
** BBS: could be interesting just for the sake of moar RF
 
** BBS: could be interesting just for the sake of moar RF

Revision as of 07:21, 7 April 2014

Project Packet radio
Status In progress
Contact flok
Last Update 2014-04-07

Fiddling with packet radio. The idea is to have a node/repeater/bbs/etc on at least 27mc, maybe other frequencies as well. In revspace and in Flok's house (in Gouda).

Currently running

We have an TNC-PI which is a TNC connected to a raspberry pi interfaced to a Midland Allan 48 plus (27 MHz) radio. All this (sadly, also the antenna) is running in het kantoortje. Every five (5) minutes it sends out a beacon of information about the setup and the request to report back any receptions. Any incoming packets are being logged to the disk. If an incoming packet appears to be an APRS packet, it should get digipeated.

Todo/ideas/plans

Increase range: setup the antenna on the roof. This requires some metalwork since our initial antenna-mount is full.

  • Add functionality
    • APRS iGate: send all incoming aprs packets to cbaprs.de
    • BBS: could be interesting just for the sake of moar RF