Difference between revisions of "NurdPower"

From RevSpace
Jump to navigation Jump to search
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
  |Name=NurdPower
 
  |Name=NurdPower
 
  |Picture=NurdPower.jpg
 
  |Picture=NurdPower.jpg
  |Omschrijving=Power usage display
+
  |Omschrijving=Power consumption display
  |Status=In progress
+
  |Status=Stalled
 
  |Contact=bertrik
 
  |Contact=bertrik
 
}}
 
}}
  
 
== Intro ==
 
== Intro ==
Shows power usage (from MQTT) on a 7-segment display.
+
Shows power consumption (from MQTT) on a 7-segment display.
 +
 
 +
TODO:
 +
* put it in a case
 +
* mount it somewhere
  
 
== Hardware ==
 
== Hardware ==
Wemos D1 mini connected to a TM1637 4x 7-segment display.
+
Wemos D1 mini connected to a TM1637 4x7-segment display.
  
 
Connections:
 
Connections:
* display 5V to Wemos 5V
+
* display VCC to Wemos 5V (3.3V also works with red LEDs)
 
* display GND to Wemos GND
 
* display GND to Wemos GND
 
* display DIO to Wemos D4
 
* display DIO to Wemos D4

Latest revision as of 14:19, 11 May 2020

Project NurdPower
NurdPower.jpg
Power consumption display
Status Stalled
Contact bertrik
Last Update 2020-05-11

Intro

Shows power consumption (from MQTT) on a 7-segment display.

TODO:

  • put it in a case
  • mount it somewhere

Hardware

Wemos D1 mini connected to a TM1637 4x7-segment display.

Connections:

  • display VCC to Wemos 5V (3.3V also works with red LEDs)
  • display GND to Wemos GND
  • display DIO to Wemos D4
  • display CLK to Wemos D3

Software

Source code is on github.

Basically it subscribes to the MQTT stream, receives power updates and displays them on the 7-segment display.

Uses the following libraries:

  • TM1637 driver to set the digits.
  • WifiManager
  • PubSubClient