Sensor-data-bridge: Difference between revisions

From RevSpace
Jump to navigation Jump to search
Line 139: Line 139:
Values are read from the noise sensor using a single I2C block read.
Values are read from the noise sensor using a single I2C block read.
These values are encoded as 32-bit units, interpreted as 32-bit floats.
These values are encoded as 32-bit units, interpreted as 32-bit floats.
References:
* DNMS is read at https://github.com/opendata-stuttgart/sensors-software/blob/beta/airrohr-firmware/airrohr-firmware.ino#L3392
* DNMS is formatted in the JSON at https://github.com/opendata-stuttgart/sensors-software/blob/beta/airrohr-firmware/airrohr-firmware.ino#L3405
* DNMS I2C code is at https://github.com/opendata-stuttgart/sensors-software/blob/beta/airrohr-firmware/dnms_i2c.cpp

Revision as of 07:14, 6 April 2021

Project LoraLuftdatenForwarder
Loraluftdatenforwarder.png
LoRaWAN forwarder for particulate matter data
Status In progress
Contact bertrik
Last Update 2021-04-06

What is this

This is a companion project of LoraWanDustSensor.

It is a Java application that takes airborne particulate matter measurement data transferred through TheThingsNetwork and forwards it to http://sensor.community (formerly Luftdaten) and http://opensensemap.org .

Features

  • Picks up particulate matter measurement data received through TheThingsNetwork, using their "v3" infrastructue
  • Forwards measurement data to sensor.community
  • Forwards measurement data to opensensemap.org, you can configure the opensense-id by adding a device attribute in TheThingsNetwork console
  • Supports Cayenne payload format for the data encoding
  • Handles particulate matter data (PM10, PM4.0, PM2.5, PM1.0), temperature, humidity, barometric pressure
  • Can be run as a systemd service, so it automatically restarts in case the software would crash

Next steps

  • add support for NB-IOT modem with t-mobile backend, see my Sim7020 project
  • add support for other backends, e.g. feinstaub-app?

Requirements

You need the following:

  • a server that is always on and connected to the internet, can be Linux or Windows
  • a Java installation (JDK to compile), at least version 8
  • some configuration on TheThingsNetwork side
  • some configuration of my application (YAML file)

Compilation

To compile the software:

  • clone the software from my github archive
 git clone https://github.com/bertrik/LoraLuftdatenForwarder.git
  • enter the LoraLuftdatenForwarder/gradle directory
 cd LoraLuftdatenForwarder/gradle
  • run the gradle script to build the software:
 ./gradlew assemble
  • the application zip & tar is now available in LoraLuftdatenForwarder/LoraLuftdatenForwarder/build/distributions

To update to the latest version:

  • Update software from github archive:
 git pull
  • perform the last two steps above again

Installation

Unzip the distribution file somewhere on your system. I put it in my home directory, for example

 cd
 tar xvf code/LoraLuftdatenForwarder/LoraLuftdatenForwarder/build/distributions/LoraLuftdatenForwarder.tar

Configuration

Node configuration

The particulate matter measurement device needs to send data in the Cayenne format. I used the following conventions:

  • PM10 is encoded as analog value on channel 1
  • PM2.5 is encoded as analog value on channel 2
  • PM1.0 is encoded as analog value on channel 0 (optional)
  • PM4.0 is encoded as analog value on channel 4 (optional)
  • Temperature is encoded using standard Cayenne encoding (optional)
  • Humidity is encoded using standard Cayenne encoding (optional)
  • Barometric pressure is encoded using standard Cayenne encoding (optional)

TheThingsNetwork application/device configuration

TTN API key rights

You need to define an 'application' on TheTheThingsNetwork.

  • Go the TTN console: https://console.cloud.thethings.network/ and log in
  • You need an 'application', create a new one, or use an existing one
  • Within the application you need a 'device', so create a new one, or use an existing one:
    • Use OTAA, LoRaMac version probably 1.0.3
    • Enter the device EUI as displayed on the display
    • Use the application keys as specified in my LoraWanDustSensor page
  • You need an API key
    • Create this on the TTN console, grant individual rights as shown in the screenshot
    • NOTE: you have only one chance to copy this key somewhere, so copy/paste it locally to a text file or something

LoraLuftdatenForwarder configuration

To configure the application:

  • Start the application without a configuration file, this will create a default template, stop the application again
 cd LoraLuftdatenForwarder
 bin/LoraLuftdatenForwarder
 (ctrl-C)
  • Edit the loraluftdatenforwarder.yaml file, example:
---
ttn:
  mqtt_url: "tcp://eu1.cloud.thethings.network"
  identity_server_url: "https://eu1.cloud.thethings.network"
  identity_server_timeout: 20
  apps:
  - name: "particulatematter"
    key: "NNSXS......."
    encoding: "CAYENNE"
luftdaten:
  url: "https://api.sensor.community"
  timeout: 20
opensense:
  url: "https://api.opensensemap.org"
  timeout: 20

So:

  • enter the name of your application
  • enter the TTN API key you saved earlier
  • other defaults are probably OK

Sensor.community

TODO

  • Go to https://devices.sensor.community/ and log in
  • Register a node with id 'TTN-<device-EUI-as-shown-on-display>' (without the spaces or hyphens, e.g. 'TTN-0000547AF1BF713C')
  • Register it with the proper configuration, e.g. SDS011 with BME280

Opensensemap

  • Go to opensensemap.org and log in
    • Create an opensense node with the proper configuration
    • Copy the opensensenmap 'box id', a long hexadecimal string
  • Go the TTN console: https://console.cloud.thethings.network/ and log in
    • Add an attribute for the device, under 'General settings', name = 'opensense-id', value = 'box id' (without the quotes) that you copied from opensensemap.org
  • The boxid should be picked up automatically by the forwarder, within an hour

Work in progress

Forwarding noise data

How it is encoded in the sensor.community firmware:

  • Three values are sent in the JSON to sensor.community:
    • "noise_LAeq", value in dB(A), meaning?
    • "noise_LA_min", value in dB(A), some kind of minimum
    • "noise_LA_max", value in dB(A), some kind of maximum

I think these can be encoded in Cayenne as a simple analog value (which has a range of approximately -327..327 with a resolution of 0.01. Just need to assign a channel number to it.

Values are read from the noise sensor using a single I2C block read. These values are encoded as 32-bit units, interpreted as 32-bit floats.

References: