LoRa-OBD2-Spy

From RevSpace
Revision as of 15:30, 27 December 2022 by Techwolf12 (talk | contribs) (Create the page :D)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Project LoRa OBD2 Spy
LoRa-OBD2-Spy.jpg
Creating a device that logs vehicle information to LoRa
Status In progress
Contact Techwolf12
Last Update 2022-12-27

You can get a lot of information from the OBD2 (OBD-II) port of your vehicle. Often times, modern cars give you a subscription service to remotely read out information like fuel status. But since I don't like subscriptions and hacking one together is a lot more fun, I will be going the DIY route on this! For the first revision, I only plan to read data from the OBD2 port. I might update it later with things like GPS tracking.

I'll be using a Wio-E5 CAN FD dev kit as starting point for this and the OBD2 plug from an old OBD device I had. This will be specific for my Hyundai Ioniq 2019 Plug-In Hybrid and I found the following page with the PID's for my car, if you want to replicate it you will probably need to find the PID's specific to your car.

!! Page is a WIP, it will be updated once I get further in the project :) !!