Lasercutter1

From RevSpace
Revision as of 22:36, 16 January 2012 by FooBar (talk | contribs)
Jump to navigation Jump to search
Project Lasercutter
Status Working"Working" is not in the list (Proposed, Initializing, In progress, Completed, Stalled, Abandoned) of allowed values for the "Project Status" property.
Contact Walter, FooBar, GMC
Last Update 2012-01-16

Lasercutter Checklist

Before using/operating the lasercutter, please check the following:

  • Fans are turned on
  • The Laser-tube is filled with water, no bubbles are visible in the stream
  • The water-pump is running without bubbles
  • The water is cool
  • The Z-axis is set correctly for your material
  • The laser output power is set correctly for your material