Difference between revisions of "Lasercutter1"
Jump to navigation
Jump to search
Line 15: | Line 15: | ||
* The Z-axis is set correctly for your material | * The Z-axis is set correctly for your material | ||
* The laser output power is set correctly for your material | * The laser output power is set correctly for your material | ||
+ | |||
+ | Then, when making a print/cut | ||
+ | |||
+ | * Do a test-run first, with the laser power disabled, to see if your design works without errors or hitting the borders | ||
+ | * Position your material efficiently | ||
+ | * Keep the fire extinguisher nearby | ||
+ | * Always remain at the lasercutter when it is active | ||
+ | * Hit the emergency/stop button when something goes wrong |
Revision as of 23:39, 16 January 2012
Project Lasercutter | |
---|---|
Status | Working"Working" is not in the list (Proposed, Initializing, In progress, Completed, Stalled, Abandoned) of allowed values for the "Project Status" property. |
Contact | Walter, FooBar, GMC |
Last Update | 2012-01-16 |
Lasercutter Checklist
Before using/operating the lasercutter, please check the following:
- Fans are turned on
- The Laser-tube is filled with water, no bubbles are visible in the stream
- The water-pump is running without bubbles
- The water is cool
- The Z-axis is set correctly for your material
- The laser output power is set correctly for your material
Then, when making a print/cut
- Do a test-run first, with the laser power disabled, to see if your design works without errors or hitting the borders
- Position your material efficiently
- Keep the fire extinguisher nearby
- Always remain at the lasercutter when it is active
- Hit the emergency/stop button when something goes wrong