Difference between revisions of "Lasercutter"

From RevSpace
Jump to: navigation, search
Line 1: Line 1:
  |Status=In progress
  |Contact=Walter, FooBar, GMC
  |Contact=Walter, FooBar, GMC

Revision as of 01:40, 17 January 2012

Project Lasercutter
Status In progress
Contact Walter, FooBar, GMC
Last Update 2012-01-17

Lasercutter Checklist

Before using/operating the lasercutter, please check the following:

  • Fans are turned on
  • The Laser-tube is filled with water, no bubbles are visible in the stream
  • The water-pump is running without bubbles
  • The water is cool
  • The Z-axis is set correctly for your material
  • The laser output power is set correctly for your material

Then, when making a print/cut

  • Do a test-run first, with the laser power disabled, to see if your design works without errors or hitting the borders
  • Position your material efficiently
  • Keep the fire extinguisher nearby
  • Always remain at the lasercutter when it is active
  • Hit the emergency/stop button when something goes wrong

Where to get nice material for lasercutting