LED skirt

From RevSpace
Revision as of 03:07, 8 December 2019 by Noor (talk | contribs)
Jump to navigation Jump to search
Project LED-skirt
2019-11-26 190712 - DSC06573.jpg
Status In progress
Contact Noor
Last Update 2019-12-08

To do

  • Cut up rest of LED strip into sections of 23 LEDs.
  • Fix rest of LED strips onto crinoline.
  • Microcontrollers and wiring.
  • Figure out how much power is needed and battery holders.
  • Want side-emitting LEDs along the bottom, but can't find side-emitting LEDs that are also waterproof, and can't put more than 1m of non-waterproof ones in a silicon tube.
  • Diameter of crinoline bottom hoop is 80 cm. Need to add an extra 100+cm of arc length of black paneling and tulle paneling to inner layers.

Timeline

2019-11-06 - 2019-11-11

Bought:

Old sketches:

2019-11-04 224115 - design1.png 2019-11-04 224123 - led skirt 2.png 2019-11-04 224131 - led skirt 3.png 2019-11-05 215433 - DSC06381.jpg 2019-11-05 215437 - DSC06382.jpg

2019-11-12 - 2019-11-24

  • Layout of LEDs, waiting for items to arrive.
  • Tested out LEDs under layers and on crinoline.

2019-11-23 220454 - DSC06537.jpg 2019-11-23 221724 - DSC06542.jpg 2019-11-24 173747 - DSC06546.jpg

2019-11-25

  • Took apart seams of inner layers of black skirt to add extra panels to fit over crinoline.

2019-11-26

  • Measured skirt on top of crinoline. Extra panel with bottom arc length of 100+cm.
  • Decided to go with 6 strips of 23 LEDs each. Cut one strip.

2019-11-26 190451 - DSC06570.jpg 2019-11-26 190712 - DSC06573.jpg

2019-12-06

  • Punched holes in crinoline, used zip ties to attach first LED strip.
  • Took apart LED circles.
  • Set up LED circles, one strip, and panel together on crinoline and used zip ties to place everything but the panel on crinoline.
  • Pictures posted by others to Facebook, RevSpace kiekjes, Twitter.