Difference between revisions of "LED-skirt"

From RevSpace
Jump to navigation Jump to search
Line 133: Line 133:
 
[[File:2020-01-11 210350 - DSC08401.jpg|200px]]
 
[[File:2020-01-11 210350 - DSC08401.jpg|200px]]
  
[[File:2020-01-11 195305 - MAH08399 2.mp4|200px]]
+
[[File:2020-01-11 195305 - MAH08399 3.mp4|200px]]
 
[[File:2020-01-11 201459 - MAH08404 2.mp4|200px]]
 
[[File:2020-01-11 201459 - MAH08404 2.mp4|200px]]

Revision as of 18:42, 13 January 2020

Project LED-skirt
2019-12-06 220632 - DSC06667.jpg
Status In progress
Contact Noor
Last Update 2020-01-13

To do

  • Add another Arduino microcontroller for LED strips only.
  • Battery holders.
  • Apply waterproofing lacquer on circles and panel.
  • Diameter of crinoline bottom hoop is 80 cm. Add an extra 100+cm of arc length of black paneling and tulle paneling to inner layers.
  • Replace strip in bottom tube with side-emitting LEDs?

LED count

  • 240 - circles (all used except one)
  • 64 - 8x8 panel.
  • 23 - strip 1.
  • 23 - strip 2.
  • 17 - strip 3.
  • 84 (?) - strip along bottom tube.

Total: 451 LEDs.

Timeline

2019-11-06 - 2019-11-11

Bought:

Old sketches:

2019-11-04 224115 - design1.png 2019-11-04 224123 - led skirt 2.png 2019-11-04 224131 - led skirt 3.png 2019-11-05 215433 - DSC06381.jpg 2019-11-05 215437 - DSC06382.jpg

2019-11-12 - 2019-11-24

  • Layout of LEDs, waiting for items to arrive.
  • Tested out LEDs under layers and on crinoline.

2019-11-23 220454 - DSC06537.jpg 2019-11-23 221724 - DSC06542.jpg 2019-11-24 173747 - DSC06546.jpg

2019-11-25

  • Took apart seams of inner layers of black skirt to add extra panels to fit over crinoline.

2019-11-26

  • Measured skirt on top of crinoline. Extra panel with bottom arc length of 100+cm.
  • Decided to go with 6 strips of 23 LEDs each. Cut one strip.

2019-11-26 190451 - DSC06570.jpg 2019-11-26 190712 - DSC06573.jpg

2019-12-03 - 2019-12-05

  • Tested out LED rings. One wire was detached so had to be soldered on.

2019-12-03 174905 - DSC06589.jpg 2019-12-05 182443 - DSC06618.jpg

2019-12-06

  • Punched holes in crinoline, used zip ties to attach first LED strip.
  • Took apart LED circles and tested FastLED programs.
  • Set up LED circles, one strip, and panel together on crinoline and used zip ties to place everything but the panel on crinoline.
  • Ran FastLED programs on everything together.
  • Pictures posted by others to Facebook, RevSpace kiekjes, Twitter.

2019-12-06 193923 - DSC06635.jpg 2019-12-06 194452 - DSC06637.jpg 2019-12-06 200017 - DSC06639.jpg 2019-12-06 220618 - DSC06666.jpg 2019-12-06 220632 - DSC06667.jpg 2019-12-06 220710 - DSC06668.jpg

2019-12-20

  • Rearranged LED circles, mounted some back on with velcro. Mounted panel with velcro.
  • Cut two more strips. Attached wires to one and mounted it horizontally at an angle.

2019-12-20 214116 - DSC06775.JPG

2019-12-22

  • Folded up bottom hem and put velcro strips all across to partially make a tube along bottom.

2019-12-22 202231 - DSC06794.jpg 2019-12-22 203241 - DSC06795.jpg

2019-12-24

2019-12-25

  • Measured and cut panel for black layer of skirt.

2020-01-10

  • Used fabric glue along bottom hem tube, in between velcro strips.
  • Soldered wires to more LED strips.

2020-01-10 145148 - DSC08359.jpg 2020-01-10 165310 - DSC08360.jpg 2020-01-10 201701 - DSC08367.jpg 2020-01-10 205118 - DSC08368.jpg 2020-01-10 211717 - DSC08370.jpg 2020-01-10 213030 - DSC08371.jpg 2020-01-10 223034 - DSC08375.jpg 2020-01-10 225615 - DSC08377.jpg

2020-01-11

  • Soldered wires to remaining LED strips.
  • Connected everything together, hooked up to an Arduino.

2020-01-11 185141 - DSC08388.jpg 2020-01-11 191121 - DSC08389.jpg 2020-01-11 202121 - DSC08392.jpg 2020-01-11 202125 - DSC08393.jpg 2020-01-11 202717 - DSC08394.jpg 2020-01-11 203657 - DSC08396.jpg 2020-01-11 204945 - DSC08397.jpg 2020-01-11 210350 - DSC08401.jpg