KernelDriverProgrammingCourse2015/PreparationDay2: Difference between revisions

From RevSpace
Jump to navigation Jump to search
m (→‎Preparation: fixed missing linebreak betweenthe two git commands)
Line 19: Line 19:
2) Update your kernel tree to my latest sunxi-wip branch
2) Update your kernel tree to my latest sunxi-wip branch


git remote update
  git remote update
git checkout -B sunxi-wip jwrdegoede/sunxi-wip
  git checkout -B sunxi-wip jwrdegoede/sunxi-wip


3) Make sure that you've the latest kernel configuration:
3) Make sure that you've the latest kernel configuration:

Revision as of 15:28, 5 August 2015

Introduction

For the second day of this course we will actually be building our own kernel and work on writing our first own driver. This builds on top of the preparations and activities from the first course day.

Preparation

If you've not done so already first walk through the preparations from day 1.

Since building a kernel from scratch can take a long time, it is a good idea to build the kernel beforehand:

1) cd into the linux directory:

cd linux

2) Update your kernel tree to my latest sunxi-wip branch

 git remote update
 git checkout -B sunxi-wip jwrdegoede/sunxi-wip

3) Make sure that you've the latest kernel configuration:

 wget https://fedorapeople.org/~jwrdegoede/kernel-driver-programming/kernel-config
 mv kernel-config .config

4) And build the kernel

 make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- oldconfig
 make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- zImage dtbs

This will take a while, once this is done (assuming there are no errors), you are all set for the second day of the course.

Back to KernelDriverProgrammingCourse2015