Intakefancontroller: Difference between revisions

From RevSpace
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 8: Line 8:
   }}
   }}


== Why? ==
== Why ==


Sometimes the need arises to temporarily shut off our forced air intake fan. In the past we simply pulled the plug on the motor, but this naturally leads to people forgetting all about it until someone notices notices an uptick in CO2 concentration, often days later. This box of plastic is meant to remedy that problem. Pressing a button will shut off the fan and set a counter. Another press will add more time to the counter. Once the countdown completes it will simply start the fan back up, no fuss.
Sometimes the need arises to temporarily shut off our forced air intake fan. In the past we simply pulled the plug on the motor, but this naturally leads to people forgetting all about it until someone notices notices an uptick in CO2 concentration, often days later. This box of plastic is meant to remedy that problem. Pressing a button will shut off the fan and set a counter. Another press will add more time to the counter. Once the countdown completes it will simply start the fan back up, no fuss.


== How? ==
== How ==


To turn the fan off, press the button labeled 'UIT'. Upon first press it will set a delay of 15 minutes, and each successive press adds another 15 minutes to the clock (up to a maximum off-time of 2 hours).  
To turn the fan off, press the button labeled 'UIT'. Upon first press it will set a delay of 15 minutes, and each successive press adds another 15 minutes to the clock (up to a maximum off-time of 2 hours).  
Line 18: Line 18:
If you want to reset the timer and/or turn the fan back on before the delay has elapsed, just press the 'AAN' button.  
If you want to reset the timer and/or turn the fan back on before the delay has elapsed, just press the 'AAN' button.  


== What's in the box? ==
== What's in the box ==


An arduino nano reads the buttons, drives the display, and switches a bistable relay. It also pulls a pin high when the fan is on, which is routed to a nodemcu used for interfacing with revspace MQTT (work in progress).
An arduino nano reads the buttons, drives the display, and switches a bistable relay. It also pulls a pin high when the fan is on, which is routed to a nodemcu used for interfacing with revspace MQTT (work in progress).
== Want to help? ==
If you want to help and/or add functionality, let me know. I can give you the OTA password for the ESP and show you how to take it off the wall without breaking something.


== Links ==
== Links ==


https://github.com/revspace/intakefancontroller
https://github.com/revspace/intakefancontroller

Revision as of 17:17, 7 January 2019


Project Intake Fan Controller
Intakefancontroller.jpg
Simple fan controller for switching our forced air intake.
Status In progress
Contact thomas
Last Update 2019-01-07

Why

Sometimes the need arises to temporarily shut off our forced air intake fan. In the past we simply pulled the plug on the motor, but this naturally leads to people forgetting all about it until someone notices notices an uptick in CO2 concentration, often days later. This box of plastic is meant to remedy that problem. Pressing a button will shut off the fan and set a counter. Another press will add more time to the counter. Once the countdown completes it will simply start the fan back up, no fuss.

How

To turn the fan off, press the button labeled 'UIT'. Upon first press it will set a delay of 15 minutes, and each successive press adds another 15 minutes to the clock (up to a maximum off-time of 2 hours).

If you want to reset the timer and/or turn the fan back on before the delay has elapsed, just press the 'AAN' button.

What's in the box

An arduino nano reads the buttons, drives the display, and switches a bistable relay. It also pulls a pin high when the fan is on, which is routed to a nodemcu used for interfacing with revspace MQTT (work in progress).

Want to help?

If you want to help and/or add functionality, let me know. I can give you the OTA password for the ESP and show you how to take it off the wall without breaking something.

Links

https://github.com/revspace/intakefancontroller