Difference between revisions of "InductionHeater"

From RevSpace
Jump to navigation Jump to search
(Created page with " {{Project |Name=InductionHeater |Status=Initializing |Contact= smeding, gori }} Idea is to make a 3kW induction spool to smelt metals and heat steel for forging....")
 
Line 8: Line 8:
 
Smeding had designed a circuit and made a BOM, see below:
 
Smeding had designed a circuit and made a BOM, see below:
  
[http://local.roysmeding.nl/3kW_BOM.png]
+
[http://local.roysmeding.nl/3kW_BOM.png http://local.roysmeding.nl/3kW_BOM.png]
  
 
Now wee need financing.  Initial estimate is that  we need another 50% on top of the BOM to get the box, spiral, coolers etc.
 
Now wee need financing.  Initial estimate is that  we need another 50% on top of the BOM to get the box, spiral, coolers etc.
  
 
Pledges:
 
Pledges:
* Gori: 50 euro
+
* [[Gori]]: 50 euro
 +
* [[Flok]]: 10 euro

Revision as of 13:40, 4 September 2014

Project InductionHeater
Status Initializing
Contact smeding, gori
Last Update 2014-09-04

Idea is to make a 3kW induction spool to smelt metals and heat steel for forging. Smeding had designed a circuit and made a BOM, see below:

http://local.roysmeding.nl/3kW_BOM.png

Now wee need financing. Initial estimate is that we need another 50% on top of the BOM to get the box, spiral, coolers etc.

Pledges: