Difference between revisions of "IbmPosDisplay"

From RevSpace
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
Status: we can't get communication going with the display using the "simple" protocol (send 0x05 + text + \n).
 +
 
   {{Project
 
   {{Project
 
   |Name=IbmPosDisplay
 
   |Name=IbmPosDisplay
   |Status=In progress
+
   |Status=Abandoned
 
   |Contact=bertrik
 
   |Contact=bertrik
 
   }}
 
   }}
Line 13: Line 15:
 
The display has the following markings on its PCB:
 
The display has the following markings on its PCB:
 
Futabacorp KU-02194V-O N
 
Futabacorp KU-02194V-O N
 +
 +
On the outside it has the following markings:
 +
* FRU P/N 73G1105
 +
* P/N 73G1100
 +
* S/N 41-N 1 5 1 8
  
 
== Interface ==
 
== Interface ==

Latest revision as of 15:50, 28 December 2016

Status: we can't get communication going with the display using the "simple" protocol (send 0x05 + text + \n).


Project IbmPosDisplay
Status Abandoned
Contact bertrik
Last Update 2016-12-28

In this project, an old IBM point-of-sale (POS) display is reverse engineered to display arbitrary text. The goal of this project is not entirely clear.

The display in question contains two rows of 20 characters each. The characters on the display are of the VFD type, in blue/cyan.

The display has the following markings on its PCB: Futabacorp KU-02194V-O N

On the outside it has the following markings:

  • FRU P/N 73G1105
  • P/N 73G1100
  • S/N 41-N 1 5 1 8

Interface

The electrical interface to the display consists of 4 wires, possibly:

  • ground
  • data A (inverting), D-
  • data B (non-inverting), D+
  • power (12V) - red

This is most likely an RS485 interface, because there is a 75176 (differential bus transceiver) inside the display.

A very simple RS232-to-RS485 conversion can be done by simply biasing the inverting data pin (data A) to half the supply voltage, and connecting the RS232 data line directly to the non-inverting data pin (data B).

TODO

  • Figure out baud rate
  • Write software to control the display

External links

Possible protocol descriptions: