GL-iNet: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
(11 intermediate revisions by 5 users not shown)
Line 4: Line 4:
  |Contact=User:FooBar
  |Contact=User:FooBar
  }}
  }}
GL-Inet.com creates nice clones of TP-Link WR-703 routers. They run OpenWRT out of the box, and have 2 ethernet interfaces, a 2.4Ghz Wifi (802.11n) radio, a usb2.0 port and 5 free GPIO ports. The first batch of 10 devices has arrived (2014/04/19)
[[File:Gl-inet.png|thumb|right|GL-Inet]]
[[File:Gl-inet.png|thumb|right|GL-Inet]]
[[File:GLiNet_05_1200_tech-blog.jpg|thumb|right|GL-Inet]]
[[File:GLiNet_05_1200_tech-blog.jpg|thumb|right|GL-Inet]]
Line 15: Line 11:
[[File:GLiNet_11_1200_tech-blog.jpg|thumb|right|GL-Inet board]]
[[File:GLiNet_11_1200_tech-blog.jpg|thumb|right|GL-Inet board]]


GL-Inet.com creates nice clones of TP-Link WR-703 routers. They run OpenWRT out of the box, and have 2 ethernet interfaces, a 2.4Ghz Wifi (802.11n) radio, a usb2.0 port and 5 free GPIO ports. Available on dealextreme/alibaba or in the RevSpace vending machine.
== RevSpace images and packages ==
Alternative  packages and install-images for OpenWrt (trunk) for GL-Connect GL-iNet v1 (GL-iNet-6416A) devices,
Build-environment for the GL-Inet, [http://glinet.sigio.nl/ http://glinet.sigio.nl/].
You will need the openwrt-ar71xx-generic-gl-inet-v1-squashfs-factory.bin file, md5sum ad2164a70e4ccc9a40f77bf49d3bb472
Note that using a custom build means you can't use the normal repositories for kernel-packages.


==Specifications==
==Specifications==
Line 21: Line 26:
|Model || GL-iNet 6408A / 6416A
|Model || GL-iNet 6408A / 6416A
|-
|-
|CPU || Atheros 9331  400MHZ
|CPU || '''Atheros AR9330''' rev 1 - MIPS 24Kc V7.4 (265.42 BogoMIPS) 400Mhz
|-
|-
|Ram || DDR 64MB
|Ram || DDR 64MB
Line 27: Line 32:
|Rom || 8MB (6408A), '''16M (6416A)'''
|Rom || 8MB (6408A), '''16M (6416A)'''
|-
|-
|Interface || 2x Gigabit RJ-45 (LAN/WAN), 1x USB2.0, 1x 1Micro USB(Power)
|Interface || 2× 100mbit/s RJ-45 (LAN/WAN), 1× USB2.0, 1× Micro USB (power)
|-
|-
|LED  || Wirless, Power
|LED  || Red and green. When both turned on amber-ish.
|-
|-
|Wireless || IEEE802.11n/g/b、IEEE802.3、IEEE802.3u
|Wireless || IEEE802.11n/g/b、IEEE802.3、IEEE802.3u
Line 35: Line 40:
|Button || Press to toggle wireless radio; Press and hold for 8 seconds to restore factory default settings
|Button || Press to toggle wireless radio; Press and hold for 8 seconds to restore factory default settings
|-
|-
|Antenna || On-board
|Antenna || Inverted F PCB trace antenna DN007 *1 https://www.ti.com/lit/an/swru120b/swru120b.pdf http://hackaday.com/2014/02/28/pcb-antenna-reference-designs/
|-
|-
|Browser Support || Chrome/Safari/Firefox/IE8-IE10
|Browser Support || Chrome/Safari/Firefox/IE8-IE10
|-
|-
|Mobile APP || Android, IOS
|Mobile app || Android, iOS (links plz!)
|-
|-
|Dynamic DNS || Free build-in dynamic DNS
|Dynamic DNS || Free build-in dynamic DNS
Line 51: Line 56:
|DIY Features || Uboot web interface; Uart soldered;  5 GPIO
|DIY Features || Uboot web interface; Uart soldered;  5 GPIO
|-
|-
|Power Supply |5V/1A micro USB
|Power Supply || 5V/1A micro USB (not included @ RevSpace market)
|-
|-
|Size || 58mm*58mm*22mm
|Size || 58mm*58mm*22mm
Line 57: Line 62:
|Weight || 42g (router only)
|Weight || 42g (router only)
|-
|-
|Power Consumption || Less than 1watt
|Power Consumption || Less than 1 watt
|-
|-
|Temperature || Working temperature 0 tot 45 Storage Temperature -40 tot 70
|Temperature || Working temperature 0°C - 45°C. Storage Temperature -40°C - 70°C
|-
|-
|}
|}
Line 67: Line 72:
[[File:Glinet-pinout.png|thumb|right|GL-Inet Pinout]]
[[File:Glinet-pinout.png|thumb|right|GL-Inet Pinout]]


The device runs OpenWRT out of the box, but it's quite easy to build your own image. Currently revspace has 1 GL-inet 16MB device, and an order has been made for a batch of 20, which should arrive somewhere around the end of April 2014.
The device runs OpenWRT out of the box, but it's quite easy to build your own image.


It might be interesting to host a local build-environment for the GL-Inet, as building a custom build means you can't use the normal repositories for kernel-packages.
 
==Serial settings==
 
* Baudrate: 115200
* Handshake: none
* Flow-control: none
 
==External antenna==
Maxell's shopping list for the external antenna modification.
* IPX naar RP-SMA pigtail, RG178: [http://www.ebay.nl/itm/U-fl-IPX-to-RP-SMA-Female-pigtail-cable-RG178-for-Antenna-wifi-network-card-/370914212565]
* Surface mount IPX: [http://www.ebay.nl/itm/10pcs-Connector-IPX-female-jack-solder-PCB-surface-SMD-SMT-vertical-mount-/281127253719]


==Links==
==Links==
Line 83: Line 98:
More images: http://shiki.tk/?p=2888
More images: http://shiki.tk/?p=2888


Externe antenne: http://shiki.tk/?p=2940
External antenna: http://shiki.tk/?p=2940
 
LAG Project page: https://wiki.laglab.org/Gl.inet

Revision as of 22:00, 15 June 2014

Project GL-Inet
Status In progress
Contact User:FooBar
Last Update 2014-06-15
GL-Inet
GL-Inet
GL-Inet
GL-Inet
GL-Inet vs TP WR-703
GL-Inet board

GL-Inet.com creates nice clones of TP-Link WR-703 routers. They run OpenWRT out of the box, and have 2 ethernet interfaces, a 2.4Ghz Wifi (802.11n) radio, a usb2.0 port and 5 free GPIO ports. Available on dealextreme/alibaba or in the RevSpace vending machine.

RevSpace images and packages

Alternative packages and install-images for OpenWrt (trunk) for GL-Connect GL-iNet v1 (GL-iNet-6416A) devices, Build-environment for the GL-Inet, http://glinet.sigio.nl/. You will need the openwrt-ar71xx-generic-gl-inet-v1-squashfs-factory.bin file, md5sum ad2164a70e4ccc9a40f77bf49d3bb472

Note that using a custom build means you can't use the normal repositories for kernel-packages.

Specifications

Model GL-iNet 6408A / 6416A
CPU Atheros AR9330 rev 1 - MIPS 24Kc V7.4 (265.42 BogoMIPS) 400Mhz
Ram DDR 64MB
Rom 8MB (6408A), 16M (6416A)
Interface 2× 100mbit/s RJ-45 (LAN/WAN), 1× USB2.0, 1× Micro USB (power)
LED Red and green. When both turned on amber-ish.
Wireless IEEE802.11n/g/b、IEEE802.3、IEEE802.3u
Button Press to toggle wireless radio; Press and hold for 8 seconds to restore factory default settings
Antenna Inverted F PCB trace antenna DN007 *1 https://www.ti.com/lit/an/swru120b/swru120b.pdf http://hackaday.com/2014/02/28/pcb-antenna-reference-designs/
Browser Support Chrome/Safari/Firefox/IE8-IE10
Mobile app Android, iOS (links plz!)
Dynamic DNS Free build-in dynamic DNS
USB Storage Support Support FAT32/EXFAT/EXT4/ETX3/EXT2/NTFS. FAT32/NTFS suggested.
USB Webcam Support MJPG or YUV
Firmware upgrade One-click upgrade; auto upgrade.
DIY Features Uboot web interface; Uart soldered; 5 GPIO
Power Supply 5V/1A micro USB (not included @ RevSpace market)
Size 58mm*58mm*22mm
Weight 42g (router only)
Power Consumption Less than 1 watt
Temperature Working temperature 0°C - 45°C. Storage Temperature -40°C - 70°C

OpenWRT

GL-Inet Pinout

The device runs OpenWRT out of the box, but it's quite easy to build your own image.


Serial settings

  • Baudrate: 115200
  • Handshake: none
  • Flow-control: none

External antenna

Maxell's shopping list for the external antenna modification.

  • IPX naar RP-SMA pigtail, RG178: [1]
  • Surface mount IPX: [2]

Links

OpenWRT Patch: https://dev.openwrt.org/ticket/15632

Build instructions for OpenWRT: https://gitlab.com/Raymii/openwrt-gl-inet/tree/master

OpenWRT Forum topic: https://forum.openwrt.org/viewtopic.php?id=47715&p=2

Images: http://galeria.tech-blog.pl/GLiNet/

More images: http://shiki.tk/?p=2888

External antenna: http://shiki.tk/?p=2940

LAG Project page: https://wiki.laglab.org/Gl.inet

Retrieved from ‘https://revspace.nl/wiki/index.php?title=GL-iNet&oldid=5094’