Difference between revisions of "Facehugger"

From RevSpace
Jump to navigation Jump to search
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Project
 
{{Project
 
  |Name=Facehugger
 
  |Name=Facehugger
  |Picture=plaatje dat je geupload hebt op de wiki
+
  |Picture=Project1.jpg
 
  |Omschrijving=This is a 3D printing project for a lifesize facehugger
 
  |Omschrijving=This is a 3D printing project for a lifesize facehugger
 
  |Status=In progress
 
  |Status=In progress
 
  |Contact=Damnlie
 
  |Contact=Damnlie
}}
+
}}
  
 
The original project you can find in Thingiverse: https://www.thingiverse.com/thing:1116392
 
The original project you can find in Thingiverse: https://www.thingiverse.com/thing:1116392
  
 
This is a diary about printing this project and a thing what I learn about 3d printing and models so expect a lot of pics and explanation.
 
This is a diary about printing this project and a thing what I learn about 3d printing and models so expect a lot of pics and explanation.
 +
 +
==== Day 1 ====
 +
 +
Printed 2 legs out of the 8 that it has. As you can see it prints the bones in two-part and you have to glue them together which will create a line that will be visible if someone would look at it closely. I found a video about this problem link it [https://www.youtube.com/watch?v=YBps-j3dHW0 here].
 +
Lesson learned here because the painting should have come after applying the wood filling and sanding it down. I used a primer from [https://www.sceneryworkshop.nl/skeleton-bone-colour-primer-cp3012.html?utm_source=GoogleShopping&utm_medium=cpc&utm_campaign=Verf%2FThe%20Army%20Painter%2FThe%20Army%20Painter%20Primers&utm_content=The%20Army%20Painter&gclid=CjwKCAjw-e2EBhAhEiwAJI5jgwAtelogt_VVwDNesLHtDtxFOXtPjw-RmAMDHXEZYLxei--HmWdxuRoCHzMQAvD_BwE Army Painter the skeleton color one]. It looks like a scary little haunted house. Forums said to leave it drying for around 15-30 minutes depending on ventilation, I left it for an hour outside.
 +
<gallery>
 +
Project2.jpg|Applied skeleton primer
 +
Project3.jpg|After putting them together nice and snuggly as my friend would say "I would not say it's nice'" (meaning its cool but scary) :)
 +
</gallery>

Latest revision as of 11:57, 13 May 2021

Project Facehugger
Project1.jpg
This is a 3D printing project for a lifesize facehugger
Status In progress
Contact Damnlie
Last Update 2021-05-13

The original project you can find in Thingiverse: https://www.thingiverse.com/thing:1116392

This is a diary about printing this project and a thing what I learn about 3d printing and models so expect a lot of pics and explanation.

Day 1

Printed 2 legs out of the 8 that it has. As you can see it prints the bones in two-part and you have to glue them together which will create a line that will be visible if someone would look at it closely. I found a video about this problem link it here. Lesson learned here because the painting should have come after applying the wood filling and sanding it down. I used a primer from Army Painter the skeleton color one. It looks like a scary little haunted house. Forums said to leave it drying for around 15-30 minutes depending on ventilation, I left it for an hour outside.