Difference between revisions of "Facehugger"

From RevSpace
Jump to navigation Jump to search
Line 5: Line 5:
 
  |Status=In progress
 
  |Status=In progress
 
  |Contact=damnlie
 
  |Contact=damnlie
}}
+
}}
  
 
The original project you can find in Thingiverse: https://www.thingiverse.com/thing:1116392
 
The original project you can find in Thingiverse: https://www.thingiverse.com/thing:1116392

Revision as of 11:50, 13 May 2021

Project Facehugger
Project1.jpg
This is a 3D printing project for a lifesize facehugger
Status In progress
Contact damnlie
Last Update 2021-05-13

The original project you can find in Thingiverse: https://www.thingiverse.com/thing:1116392

This is a diary about printing this project and a thing what I learn about 3d printing and models so expect a lot of pics and explanation.

Day 1

Printed 2 legs out of the 8 that it has. As you can see it prints the bones in two-part and you have to glue them together which will create a line that will be visible if someone would look at it closely. I found a video about this problem link it here. Lesson learned here because the painting should have come after applying the wood filling and sanding it down. I used a primer from Army Painter the skeleton color one. It looks like a scary little haunted house. Forums said to leave it drying for around 15-30 minutes depending on ventilation, I left it for an hour outside.