Event:SoftwareDefinedRadioSDRFMDABontvangerworkshop

From RevSpace
Revision as of 16:51, 17 April 2019 by Cmpxchg (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Event Foundations Friday: Software Defined Radio workshop
UpduinoV2.jpg
Name Foundations Friday: Software Defined Radio workshop


Duration 2019-06-28 20:00 - 2019-06-28 23:00
Information


* Location: Overgoo 1, Leidschendam
* Open from: 20:00

Event FPGA workshop
UpduinoV2.jpg
Name FPGA workshop
Contact Ranzbak
Duration 2019-04-13 14:00 - 2019-04-13 17:30
Information


* Location: Overgoo 1, Leidschendam
* Open from: 13:37


Prerequisites: Please bring your own RTL-SDR hardware (very cheap, $20-$40 or less) or other SDR hardware (USRP or other GNURadio supported SDR). There might be a few available @ revspace coin-op machine by the time the workshop starts.

Evening will comprise: 1. Quick introduction into GNURadio companion 3.7.11.1 (have it preinstalled and git client to download the samplecode)

2. A little bit of the theory of signal processing (about an hour or 1.5 hrs) 2.1 Real signals - real-sinewaves in the timedomain / displayed using time sink / oscillioscope - Multiplying real-sinewaves and frequency domain/spectrogram (mixing in radioterms) 2.2 Complex signals - Quadrature or complex (IQ) sinewave signal sources and displaying in timedomain ('constellation' diagram) and frequency domain (FFT) - Multiplying quadrature (IQ) sinewaves and spectrogram 2.3 Filtering complex signals - Filtering IQ signals using FIR filters with complex taps - (very quick) calculating FIR filter coefficients using gr-filter of inverse FFT/inverse DFT and windowing functions, impulse response of filter

3. Radio receivers and/or detectors - Build a simple mono FM receiver using blocks with built-in feedback networks - Build a RDS FM receiver and connect it with your RTL-SDR or other gnuradio-support SDR/radiodata input device

Bonus: Build with welle.io a SDR-based DAB+ receiver. For this a QTQuick 5.x installation might be required.


Attendees

(Nick)Name Has (some) SDR Reciever
cmpxchg Yes