Difference between revisions of "Door sign"

From RevSpace
Jump to navigation Jump to search
(graphic design)
(graphic design)
Line 25: Line 25:
 
= graphic design =
 
= graphic design =
 
* [[Logo]]
 
* [[Logo]]
* LED unpolished 2B surface, stained with Copper sulphate, to get a golden color. Will most  likely patina to green over time.
 
* Letters polished rvs
 
* LED area heat treated to golder color
 
 
* Letters area polished with rvs polishing paste and buffing wheel
 
* Letters area polished with rvs polishing paste and buffing wheel
 +
* LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
 
* rest etched
 
* rest etched

Revision as of 12:07, 3 July 2018

Project Door sign
RevspaceignTest.JPG
Status Initializing
Contact User:Gori, User:Thomas
Last Update 2018-07-03


Make a cooler revspace sign for about the door

Specs

Sign must

  • be 600x400 mm or enough to cover the ugly patch above the door
  • be securely fastened and removeable
  • leave no significant marks on the building
  • be awesome

Technical design

  • 2mm 304 stainless steel plate, 2B finish
  • 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building
  • Use Vinyl sticker as resist, also sticker the back and edges
  • Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray

graphic design

  • Logo
  • Letters area polished with rvs polishing paste and buffing wheel
  • LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
  • rest etched