Door sign: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{Project | {{Project | ||
|Name=Door sign | |Name=Door sign | ||
|Status= | |Status=Completed | ||
|Picture= | |Picture=IMG_20180706_174558.jpg | ||
|Contact=User:Gori | |Contact=User:Gori | ||
|Contact1=User:Thomas | |||
}} | }} | ||
Make a cooler revspace sign for about the door | |||
= Finished product = | |||
* https://revspace.nl/kiekjes/view/20180702/P1010323.JPG | |||
* https://revspace.nl/kiekjes/view/20180702/P1010322.JPG | |||
= Specs = | |||
Sign must | |||
* be 600x400 mm or enough to cover the ugly patch above the door | |||
* be securely fastened and removeable | |||
* leave no significant marks on the building | |||
* be awesome | |||
= Technical design = | |||
* 2mm [https://www.hego.nl/rvs-kwaliteiten-aisi-304/ 304 stainless] steel plate, [http://images.linnlive.com/3e6336e0c39790bdb0c0c58c72f9f8a8/6c2967f2-bf0c-4212-b665-93836919da13.jpg 2B finish] | |||
* 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building | |||
* Use Vinyl sticker as resist, also sticker the back and edges | |||
* Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray | |||
* Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application! | |||
= graphic design = | |||
* [[Logo]] | |||
* Letters area polished with rvs polishing paste and buffing wheel | |||
* LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour | |||
* rest etched | |||
= Gallery = | |||
<gallery> | |||
RevspaceignTest.JPG | |||
File:P1010262.JPG | |||
File:P1010257.JPG | |||
File:P1010319.JPG | |||
File:P1010320.JPG | |||
File:IMG_20180706_174558.jpg | |||
</gallery> | |||
Latest revision as of 15:52, 6 July 2018
| Project Door sign | |
|---|---|
| |
| Status | Completed |
| Contact | User:Gori, User:Thomas |
| Last Update | 2018-07-06 |
Make a cooler revspace sign for about the door
Finished product
- https://revspace.nl/kiekjes/view/20180702/P1010323.JPG
- https://revspace.nl/kiekjes/view/20180702/P1010322.JPG
Specs
Sign must
- be 600x400 mm or enough to cover the ugly patch above the door
- be securely fastened and removeable
- leave no significant marks on the building
- be awesome
Technical design
- 2mm 304 stainless steel plate, 2B finish
- 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building
- Use Vinyl sticker as resist, also sticker the back and edges
- Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray
- Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application!
graphic design
- Logo
- Letters area polished with rvs polishing paste and buffing wheel
- LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
- rest etched
