Difference between revisions of "Door sign"
Jump to navigation
Jump to search
(→Specs) |
|||
(7 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
{{Project | {{Project | ||
|Name=Door sign | |Name=Door sign | ||
− | |Status= | + | |Status=Completed |
− | |Picture= | + | |Picture=IMG_20180706_174558.jpg |
|Contact=User:Gori | |Contact=User:Gori | ||
|Contact1=User:Thomas | |Contact1=User:Thomas | ||
Line 9: | Line 9: | ||
Make a cooler revspace sign for about the door | Make a cooler revspace sign for about the door | ||
+ | |||
+ | = Finished product = | ||
+ | |||
+ | * https://revspace.nl/kiekjes/view/20180702/P1010323.JPG | ||
+ | * https://revspace.nl/kiekjes/view/20180702/P1010322.JPG | ||
= Specs = | = Specs = | ||
Line 22: | Line 27: | ||
* Use Vinyl sticker as resist, also sticker the back and edges | * Use Vinyl sticker as resist, also sticker the back and edges | ||
* Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray | * Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray | ||
+ | * Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application! | ||
+ | |||
= graphic design = | = graphic design = | ||
* [[Logo]] | * [[Logo]] | ||
− | * LED | + | * Letters area polished with rvs polishing paste and buffing wheel |
− | + | * LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour | |
* rest etched | * rest etched | ||
+ | |||
+ | = Gallery = | ||
+ | <gallery> | ||
+ | RevspaceignTest.JPG | ||
+ | File:P1010262.JPG | ||
+ | File:P1010257.JPG | ||
+ | File:P1010319.JPG | ||
+ | File:P1010320.JPG | ||
+ | File:IMG_20180706_174558.jpg | ||
+ | </gallery> |
Latest revision as of 16:52, 6 July 2018
Project Door sign | |
---|---|
Status | Completed |
Contact | User:Gori, User:Thomas |
Last Update | 2018-07-06 |
Make a cooler revspace sign for about the door
Finished product
- https://revspace.nl/kiekjes/view/20180702/P1010323.JPG
- https://revspace.nl/kiekjes/view/20180702/P1010322.JPG
Specs
Sign must
- be 600x400 mm or enough to cover the ugly patch above the door
- be securely fastened and removeable
- leave no significant marks on the building
- be awesome
Technical design
- 2mm 304 stainless steel plate, 2B finish
- 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building
- Use Vinyl sticker as resist, also sticker the back and edges
- Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray
- Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application!
graphic design
- Logo
- Letters area polished with rvs polishing paste and buffing wheel
- LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
- rest etched