Difference between revisions of "CubeCell"

From RevSpace
Jump to navigation Jump to search
(Created page with "== Intro == This page is about the [https://heltec.org/project/htcc-ab01/ CubeCell board] from heltec.org * based on an ASR605x (ARM cortex M0+ core) + SX1262 radio chip * lo...")
 
m
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
{{Project
 +
  |Name=CubeCell
 +
  |Omschrijving=Low-power LoRaWAN Board
 +
  |Picture=cubecell.jpg
 +
  |Status=Initializing
 +
  |Contact=bertrik
 +
}}
 +
 
== Intro ==
 
== Intro ==
  
 
This page is about the [https://heltec.org/project/htcc-ab01/ CubeCell board] from heltec.org
 
This page is about the [https://heltec.org/project/htcc-ab01/ CubeCell board] from heltec.org
* based on an ASR605x (ARM cortex M0+ core) + SX1262 radio chip
+
* based on an ASR605x (ARM cortex M0+ core) + SX1262(?) radio chip
 
* low power, only microamps sleep current
 
* low power, only microamps sleep current
 
* battery connection
 
* battery connection
Line 10: Line 18:
  
 
What I'd like to investigate:
 
What I'd like to investigate:
* Can we run the arduino-lmic core on this? This should be possible because arduino-lmic is also targeted to sx1262 core.
+
* Can we run the arduino-lmic library on this? This should be possible because arduino-lmic is also targeted to a sx12x2 core.
 
* Can we compile the code with platformio? Currently this is not the case, you need the Arduino IDE...
 
* Can we compile the code with platformio? Currently this is not the case, you need the Arduino IDE...
 
   https://github.com/HelTecAutomation/ASR650x-Arduino/issues/11
 
   https://github.com/HelTecAutomation/ASR650x-Arduino/issues/11
 
   https://github.com/platformio/platformio-core/issues/3078
 
   https://github.com/platformio/platformio-core/issues/3078
 
* Use this board for my [[LoraBatBox]]
 
* Use this board for my [[LoraBatBox]]

Revision as of 00:35, 5 December 2019

Project CubeCell
350px
Low-power LoRaWAN Board
Status Initializing
Contact bertrik
Last Update 2019-12-05

Intro

This page is about the CubeCell board from heltec.org

  • based on an ASR605x (ARM cortex M0+ core) + SX1262(?) radio chip
  • low power, only microamps sleep current
  • battery connection
  • solar cell connection

the github page for the Arduino code

What I'd like to investigate:

  • Can we run the arduino-lmic library on this? This should be possible because arduino-lmic is also targeted to a sx12x2 core.
  • Can we compile the code with platformio? Currently this is not the case, you need the Arduino IDE...
 https://github.com/HelTecAutomation/ASR650x-Arduino/issues/11
 https://github.com/platformio/platformio-core/issues/3078