Difference between revisions of "Compaq LTE Elite 4/50E"

From RevSpace
Jump to navigation Jump to search
(Finally wrote some of what I wanted to write :))
Line 7: Line 7:
 
   }}
 
   }}
 
I found this old laptop and I'm figuring out what to do with it. Fun fact: this laptop is almost exactly as old I am.
 
I found this old laptop and I'm figuring out what to do with it. Fun fact: this laptop is almost exactly as old I am.
 +
 +
= First impression =
  
 
== Status when I found it ==
 
== Status when I found it ==
Line 34: Line 36:
 
== Display ==
 
== Display ==
  
The monochrome screen is surprisingly good. The contrast is great, the resolution is... Very Good Anyway. And there is no ghosting at all. I have seen early 90's laptops before where you could draw shapes by moving the mouse. Not this one. There is only one thing missing: color. But it's okay, there is a VGA port on the back, and there is plenty of color in there.
+
The monochrome screen is surprisingly good. The contrast is great, the resolution is... Very Good Anyway. The lack of subpixels makes it look very sharp. And there is no ghosting at all. I have seen early 90's laptops before where you could draw shapes by moving the mouse. Not this one. There is only one thing missing: color. But it's okay, there is a VGA port on the back, and there is plenty of color in there.
  
 
== Sound ==
 
== Sound ==
Line 46: Line 48:
 
== More details and photos coming soon! ==
 
== More details and photos coming soon! ==
  
 +
= Modding! =
 +
 +
== Battery bay ==
 +
 +
Since the battery is completely dead, I removed it. We now have space to fit stuff in. This space is just wide enough to fit a [https://wiki.sha2017.org/w/Projects:Badge SHA2017 Badge] inside. No joke, it fits like a glove! Well, after some creative OpenSCAD and 3d-printing work that is. I printed many failed attempts in red PETG and just as it was about to run out I did my final print. So I inserted the green PETG in the bowden extruder while the red filament was still in the tube. They print at the same settings anyway, but the layer effect turned out very nice, by accident.
 +
 +
== Serial port ==
 +
I also ordered a bunch of [https://www.aliexpress.com/item/1pcs-lot-MAX3232-RS232-to-TTL-Serial-Port-Converter-Module-DB9-Connector-MAX232/32722395554.html MAX232 boards] and I had some CH340 ttl-serial-usb lying around. So I took one of both and connected them to my modern linux laptop at first. I could get a serial console, run ssh, and even revbank inside the Windows 3.1 Terminal app.
 +
 +
So I now needed a way to connect the Badge sitting in the battery bay to the serial port on the back of the laptop. Complete disassembly was required. I decided to make a second serial port parallel to the first port. This breaks when you connect devices to both ports, [http://www.jargon.net/jargonfile/d/Dontdothatthen.html so don't do that then!]. At first I connected it directly to a MAX232 board, but than I decided to make it removable, just like the original battery. So I yanked a DE9 port from an old desktop board from the e-waste pile and soldered it in parallel to the rear port on a short ribbon cable, snipped away some plastic, added some padding and hotglue. We now have a internal DE9 serial port inside the <del>battery bay</del> BadgeBay™!
 +
 +
During the disassembly process the fan connector broke off. But that's okay as you'll read in the next section.
 +
 +
== Power hackery ==
 +
 +
Up to this part, the Badge and the CH340 and MAX232 were powered from an external USB supply (mostly my modern laptop since I was flashing/debugging the Badge all the time anyway). But this wouldn't be good enough for a permanent setup. So I needed a way to connect Ground and +5V from the laptop to the badge. Ground was already present in the DE9 connector, so we are already halfway! But that's not enough. I needed a way to connect one extra pin reliably while keeping the carefully constructed hotpluggable toolless BadgeBay™ system intact. So i snipped one of the retaining screw thingies seperate from the shielding, connected a red wire, and then I hotglued a metal spring to the inside of the laptop. I soldered a red wire to the spring as well. I lined the spring up with the DE9 retaining screw.
 +
 +
Back to the broken fan connector. I spliced the wires from there and from the spring (and later another wire for the OPL2LPT) together and connected those to the pads behind the fan connector. We now have a BadgeBay™ +5V rail!
 +
 +
(more text and pics coming soon!)
  
<!--
+
<gallery>
[[File:Compaq LTE 4-50E usb-serieel.jpg|500px|thumb|left|Revbank werkt via een linuxbak met ssh, en usb-serieel ernaartoe]]
+
Compaq LTE 4-50E usb-serieel.jpg|Serial - MAX232 board - CH340 board - USB
-->
+
Compaq LTE 4-50E revbank.jpg|Revbank over serial console
 +
</gallery>

Revision as of 00:24, 25 March 2018

Project Compaq LTE 4/50E
Compaq LTE 4-50E revbank.jpg
I found a 1994 laptop, what can it still do?
Status In progress
Contact Peetz0r
Last Update 2018-03-25

I found this old laptop and I'm figuring out what to do with it. Fun fact: this laptop is almost exactly as old I am.

First impression

Status when I found it

It had the (presumably) original harddrive still present and working (after 23 years!). On it was Windows 3.x with lots of Compaq bloatware and personal data of the previous owner. I decided top keep this as-is, because the original software/drivers/etc is hard to find/replace but I did not peek around very much because of privacy reasons. The battery was very much dead, the floppy drive did not work, and the bottom RAM cover was missing, but it did work just fine. A service manual was easy to find online: Media:Compaq LTE Elite service manual.pdf (2.6 MB, 387 pages).

Specs

  • 486 DX2 50 MHz
  • 8 MB ram (4MB onboard + 4MB on a proprietary expansion card)
  • 250 MB harddisk
  • 9,5" 640x480 monochrome TFT display
  • 2-button PS/2 trackball
  • PC speaker
  • 2 empty PCMCIA slots
  • 3,5" floppy drive (broken)
  • 12V 2Ah NiMH battery (dead)
  • no real soundcard
  • no network hardware of any kind

Storage

The first thing I did was take out the original harddrive and go replace it with something else. I went to Aliexpress and got myself a IDE-CF adapter and a 2GB CF card. It could not boot from the card. I borrowed some more cards from another Revspacer and found out that cards up to 1Gb work but larger cards do not. But since the original disk was 250 MB, I decided that 256MB would be enough. I ordered a "industrial" 256MB card and it has been working just fine so far. The original harddrive sits in a aluminium caddy, which is easily removable. That's great, since this is the only way to move files from/to this machine I'll have to use this rather often.

Floppy drive

The floppy drive does not work. It does make some noises but the disk never spins. The rubber belt inside was very much disintegrating, but replacing the belt did not result in a working drive yet. But even if it did, I have no other devices anywhere with a floppy drive anyway. WONTFIX. By the way, the drive is a Citizen W1D.

Display

The monochrome screen is surprisingly good. The contrast is great, the resolution is... Very Good Anyway. The lack of subpixels makes it look very sharp. And there is no ghosting at all. I have seen early 90's laptops before where you could draw shapes by moving the mouse. Not this one. There is only one thing missing: color. But it's okay, there is a VGA port on the back, and there is plenty of color in there.

Sound

There is only a PC speaker inside. But it's a very loud one. Fortunately we get to change the volume trough Fn keys. It even has a graphical overlay on top of textmode MS-DOS, without any drivers!

But I want more! I did but two parallel port soundcards: a OPL2LPT (AdLib clone) and a CVX4 (Covox Speech Thing clone). Here is a YouTube video demonstrating how that looks. Fun fact, that laptop in that video is the high-end model of the same series as this one!

The OPL2LPT works perfectly fine, but I haven't had much luck with the CVX4 yet. Needs more testing...

More details and photos coming soon!

Modding!

Battery bay

Since the battery is completely dead, I removed it. We now have space to fit stuff in. This space is just wide enough to fit a SHA2017 Badge inside. No joke, it fits like a glove! Well, after some creative OpenSCAD and 3d-printing work that is. I printed many failed attempts in red PETG and just as it was about to run out I did my final print. So I inserted the green PETG in the bowden extruder while the red filament was still in the tube. They print at the same settings anyway, but the layer effect turned out very nice, by accident.

Serial port

I also ordered a bunch of MAX232 boards and I had some CH340 ttl-serial-usb lying around. So I took one of both and connected them to my modern linux laptop at first. I could get a serial console, run ssh, and even revbank inside the Windows 3.1 Terminal app.

So I now needed a way to connect the Badge sitting in the battery bay to the serial port on the back of the laptop. Complete disassembly was required. I decided to make a second serial port parallel to the first port. This breaks when you connect devices to both ports, so don't do that then!. At first I connected it directly to a MAX232 board, but than I decided to make it removable, just like the original battery. So I yanked a DE9 port from an old desktop board from the e-waste pile and soldered it in parallel to the rear port on a short ribbon cable, snipped away some plastic, added some padding and hotglue. We now have a internal DE9 serial port inside the battery bay BadgeBay™!

During the disassembly process the fan connector broke off. But that's okay as you'll read in the next section.

Power hackery

Up to this part, the Badge and the CH340 and MAX232 were powered from an external USB supply (mostly my modern laptop since I was flashing/debugging the Badge all the time anyway). But this wouldn't be good enough for a permanent setup. So I needed a way to connect Ground and +5V from the laptop to the badge. Ground was already present in the DE9 connector, so we are already halfway! But that's not enough. I needed a way to connect one extra pin reliably while keeping the carefully constructed hotpluggable toolless BadgeBay™ system intact. So i snipped one of the retaining screw thingies seperate from the shielding, connected a red wire, and then I hotglued a metal spring to the inside of the laptop. I soldered a red wire to the spring as well. I lined the spring up with the DE9 retaining screw.

Back to the broken fan connector. I spliced the wires from there and from the spring (and later another wire for the OPL2LPT) together and connected those to the pads behind the fan connector. We now have a BadgeBay™ +5V rail!

(more text and pics coming soon!)