CNC plasma cutter: Difference between revisions

From RevSpace
Jump to navigation Jump to search
m (Woops, I'm a User of course)
No edit summary
Line 1: Line 1:
{{Project
|Name= CNC plasma cutter
|Status=Initializing
|Contact= Walter
}}
After acquiring a [[Plasmasnijder|plasma cutter]] at the space, it seemed only logical to try and fabricate a CNC version eventually.
After acquiring a [[Plasmasnijder|plasma cutter]] at the space, it seemed only logical to try and fabricate a CNC version eventually.


Line 18: Line 24:


After this, we'll be ready to construct the three rails (2x X and 1x Y) that make up the bulk of the CNC machine.
After this, we'll be ready to construct the three rails (2x X and 1x Y) that make up the bulk of the CNC machine.
== Some rough ideas by Yotson ==
*1.5 x 3.0 Meter max. material size. Spec of plasma cutter mentions 12mm as max thickness.
    Table should manage to hold the weight of a 1.5m x 3.0m x 20?mm sheet of steel.
*weight of plasma nozzle + hoses/wires?
*length of nozzle + hoses/wires?
*speed of nozzle over material > 10 cm per second. (non cutting)
*nozzle placement accuracy: < 1mm
*transportable. Able to fit through 'standard' door (on its side, obviously)
*Maybe:
'upgradeable' by placing rotary cutting tool, pencil, knife, spray can, .... ???
---------------------------------------------------
Transport axes:
x, y:
angle iron and skate wheels + bearings?
linear motors?
threaded rod, DC motors, encoders?
z  :
? + threaded bolt, manual adjustment between height of 0mm and 50mm.
---------------------------------------------------   
 
== Threaded rod info ==
ISO standard. From HTTP://en.wikipedia.org/wiki/ISO_metric_screw_thread
{| class="wikitable"
|-
!scope="col" | Diameter in mm.
!scope="col" | Pitch (fine)
!scope="col" | Pitch (coarse)
!scope="col" | Rotational speed 10 cm/s lin. motion (coarse)
!scope="col" | Rotational speed 10 cm/s lin. motion (fine)
|-
|20 or 22||2.5||1.5 or||40rps, 2400rpm||50rps, 3000rpm
|-
||      ||  ||2    ||              ||66.7rps, 4000rpm
|-
|30 or 33||3.5||2||28.6rps, 1714rpm||66.7rps, 4000rpm
|}

Revision as of 17:27, 22 December 2012

Project CNC plasma cutter
Status Initializing
Contact Walter
Last Update 2012-12-22

After acquiring a plasma cutter at the space, it seemed only logical to try and fabricate a CNC version eventually.

This goal is still a while away for now, but as always, we are full of Ideas and this is a convenient place to put them.

Specs

  • 3x3 m working area
  • movement speed of 1000mm/s
  • Calibrated accuracy and precision of +/- 0.1mm

Axis motors

smeding is going to design and build a proof of concept linear (synchronous) motor for use in the X- and Y-axes. This test rig will be used to determine whether a DIY LSM is at all useful for our application and to finalize the design if we choose to go with the concept. Specifically, this involves figuring out:

  • How the attainable accuracy compares to the wanted specifications
  • How the attainable movement speed compares to the wanted specifications
  • A final design for the drive electronics
  • Coil and armature geometries
  • Rail geometries (magnet size, spacing and orientation pattern and any backing)
  • Optimal control schemes

After this, we'll be ready to construct the three rails (2x X and 1x Y) that make up the bulk of the CNC machine.

Some rough ideas by Yotson

  • 1.5 x 3.0 Meter max. material size. Spec of plasma cutter mentions 12mm as max thickness.
    Table should manage to hold the weight of a 1.5m x 3.0m x 20?mm sheet of steel.
  • weight of plasma nozzle + hoses/wires?
  • length of nozzle + hoses/wires?
  • speed of nozzle over material > 10 cm per second. (non cutting)
  • nozzle placement accuracy: < 1mm
  • transportable. Able to fit through 'standard' door (on its side, obviously)
  • Maybe:

'upgradeable' by placing rotary cutting tool, pencil, knife, spray can, .... ???


Transport axes: x, y: angle iron and skate wheels + bearings?


linear motors? threaded rod, DC motors, encoders?

z  : ? + threaded bolt, manual adjustment between height of 0mm and 50mm.



Threaded rod info

ISO standard. From HTTP://en.wikipedia.org/wiki/ISO_metric_screw_thread

Diameter in mm. Pitch (fine) Pitch (coarse) Rotational speed 10 cm/s lin. motion (coarse) Rotational speed 10 cm/s lin. motion (fine)
20 or 22 2.5 1.5 or 40rps, 2400rpm 50rps, 3000rpm
2 66.7rps, 4000rpm
30 or 33 3.5 2 28.6rps, 1714rpm 66.7rps, 4000rpm