From RevSpace
Revision as of 16:45, 18 February 2019 by Ralph Benadski (talk | contribs)
Jump to navigation Jump to search

NAND audio crasher

by benadski, made for hackerhotel 2019 through hole soldering workshop

Turns your awkward "Kinderen voor kinderen" collection into nice noise.

Description of this soldering kit:

-Small PCB with 4 jack 3.5mm connectors and potentiometer.

-Turns audio into a squarewave and mixes this with another squarewave.

-Has a gate and CV input.

-Only consumes about 2mA at 5V.

-Accepts line-ish level or piëzo contact microphone signal on the input.


Audiocrasher sch.jpg


Audiocrasher PCB.jpg

ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution: