Audiocrasher

From RevSpace
Jump to navigation Jump to search

NAND audio crasher

by benadski, made for hackerhotel 2019 through hole soldering workshop

Turns your awkward "Kinderen voor kinderen" collection into nice noise.


Description of this soldering kit:

-Small PCB with 4 jack 3.5mm connectors and potentiometer.

-Turns audio into a squarewave and mixes this with another squarewave.

-Has a gate and CV input.

-Only consumes about 2mA at 5V.

-Accepts line-ish level or piëzo contact microphone signal on the input.

-External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example.)

-"Standard" analog synth power interface

If you design a frontplate it might be a nice addition to your (eurorack) analog synth.


Schematic:

Audiocrasher sch.jpg


Soldered:

Audiocrasher PCB.jpg


ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:

Fix.jpg

The pot provided is 100k, but that does not really matter. :)