Difference between revisions of "Audiocrasher"

From RevSpace
Jump to navigation Jump to search
(Incomplete)
 
Line 1: Line 1:
 +
 +
== NAND audio crasher ==
 +
by benadski, made for hackerhotel 2019 through hole soldering workshop
 +
 
Turns your awkward "Kinderen voor kinderen" collection into nice noise.
 
Turns your awkward "Kinderen voor kinderen" collection into nice noise.
'' ''
 
Description of this hackerhotel soldering kit:
 
  
Small PCB with 4 jack 3.5mm connectors and potentiometer.
 
Turns audio into a squarewave and mixes this with another squarewave.
 
Has a gate and CV input.
 
Only consumes about 2mA at 5V.
 
Accepts line-ish level or piëzo contact microphone signal on the input.
 
  
ERRATA: PCB layout error, but it's fixed easily. Stay tuned for the solution...
+
'''Description of this soldering kit:'''
 +
 
 +
-Small PCB with 4 jack 3.5mm connectors and potentiometer.
 +
 
 +
-Turns audio into a squarewave and mixes this with another squarewave.
 +
 
 +
-Has a gate and CV input.
 +
 
 +
-Only consumes about 2mA at 5V.
 +
 
 +
-Accepts line-ish level or piëzo contact microphone signal on the input.
 +
 
 +
 
 +
ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:
 +
[[File:fix.jpg]]

Revision as of 16:41, 18 February 2019

NAND audio crasher

by benadski, made for hackerhotel 2019 through hole soldering workshop

Turns your awkward "Kinderen voor kinderen" collection into nice noise.


Description of this soldering kit:

-Small PCB with 4 jack 3.5mm connectors and potentiometer.

-Turns audio into a squarewave and mixes this with another squarewave.

-Has a gate and CV input.

-Only consumes about 2mA at 5V.

-Accepts line-ish level or piëzo contact microphone signal on the input.


ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution: Fix.jpg