Difference between revisions of "Audiocrasher"
(Incomplete) |
|||
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | |||
+ | == NAND audio crasher == | ||
+ | by benadski, made for hackerhotel 2019 through hole soldering workshop | ||
+ | |||
Turns your awkward "Kinderen voor kinderen" collection into nice noise. | Turns your awkward "Kinderen voor kinderen" collection into nice noise. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ERRATA: PCB layout error, but it's fixed easily. | + | '''Description of this soldering kit:''' |
+ | |||
+ | -Small PCB with 4 jack 3.5mm connectors and potentiometer. | ||
+ | |||
+ | -Turns audio into a squarewave and mixes this with another squarewave. | ||
+ | |||
+ | -Has a gate and CV input. | ||
+ | |||
+ | -Only consumes about 2mA at 5V. | ||
+ | |||
+ | -Accepts line-ish level or piëzo contact microphone signal on the input. | ||
+ | |||
+ | -External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example.) | ||
+ | |||
+ | -"Standard" analog synth power interface | ||
+ | |||
+ | If you design a (eurorack) frontplate it might be a nice addition to your analog synth. | ||
+ | |||
+ | |||
+ | |||
+ | Schematic: | ||
+ | |||
+ | [[File:audiocrasher_sch.jpg]] | ||
+ | |||
+ | |||
+ | Soldered: | ||
+ | |||
+ | [[File:audiocrasher_PCB.jpg]] | ||
+ | |||
+ | |||
+ | '''ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:''' | ||
+ | |||
+ | [[File:fix.jpg]] | ||
+ | |||
+ | The pot provided is 100k, but that does not really matter. :) |
Latest revision as of 18:10, 18 February 2019
NAND audio crasher
by benadski, made for hackerhotel 2019 through hole soldering workshop
Turns your awkward "Kinderen voor kinderen" collection into nice noise.
Description of this soldering kit:
-Small PCB with 4 jack 3.5mm connectors and potentiometer.
-Turns audio into a squarewave and mixes this with another squarewave.
-Has a gate and CV input.
-Only consumes about 2mA at 5V.
-Accepts line-ish level or piëzo contact microphone signal on the input.
-External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example.)
-"Standard" analog synth power interface
If you design a (eurorack) frontplate it might be a nice addition to your analog synth.
Schematic:
Soldered:
ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:
The pot provided is 100k, but that does not really matter. :)