Audiocrasher: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 18: Line 18:
-Accepts line-ish level or piëzo contact microphone signal on the input.
-Accepts line-ish level or piëzo contact microphone signal on the input.


-External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example.)
-"Standard" analog synth power interface
If you design a (eurorack) frontplate it might be a nice addition to your analog synth.
Schematic:
[[File:audiocrasher_sch.jpg]]
Soldered:
[[File:audiocrasher_PCB.jpg]]
'''ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:'''


ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:
[[File:fix.jpg]]
[[File:fix.jpg]]
The pot provided is 100k, but that does not really matter. :)

Latest revision as of 16:10, 18 February 2019

NAND audio crasher

by benadski, made for hackerhotel 2019 through hole soldering workshop

Turns your awkward "Kinderen voor kinderen" collection into nice noise.


Description of this soldering kit:

-Small PCB with 4 jack 3.5mm connectors and potentiometer.

-Turns audio into a squarewave and mixes this with another squarewave.

-Has a gate and CV input.

-Only consumes about 2mA at 5V.

-Accepts line-ish level or piëzo contact microphone signal on the input.

-External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example.)

-"Standard" analog synth power interface

If you design a (eurorack) frontplate it might be a nice addition to your analog synth.


Schematic:

Audiocrasher sch.jpg


Soldered:

Audiocrasher PCB.jpg


ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:

Fix.jpg

The pot provided is 100k, but that does not really matter. :)