Difference between revisions of "Assembling RhoCoCo"

From RevSpace
Jump to navigation Jump to search
(Created page with "{{Project |Name=Assembling a RhoCoCo home computer |Picture=plaatje dat je geupload hebt op de wiki |Omschrijving=This text describes how to assemble a RhoCoCo home compute...")
 
Line 1: Line 1:
 
{{Project
 
{{Project
 
  |Name=Assembling a RhoCoCo home computer
 
  |Name=Assembling a RhoCoCo home computer
  |Picture=plaatje dat je geupload hebt op de wiki
+
  |Picture=IMG 20190328 152503.jpg
 
  |Omschrijving=This text describes how to assemble a RhoCoCo home computer from two PCB's, ten (socketed) integrated circuits, a dozen connectors and various other parts.
 
  |Omschrijving=This text describes how to assemble a RhoCoCo home computer from two PCB's, ten (socketed) integrated circuits, a dozen connectors and various other parts.
 
  |Status=Initializing
 
  |Status=Initializing

Revision as of 13:18, 29 March 2019

Project Assembling a RhoCoCo home computer
IMG 20190328 152503.jpg
This text describes how to assemble a RhoCoCo home computer from two PCB's, ten (socketed) integrated circuits, a dozen connectors and various other parts.
Status Initializing
Contact Mahjongg
Last Update 2019-03-29

We need, two PCB's the parts from this list: a soldering iron, and this assembly drawing to locate each part.

we start by soldering the only SMT part to the PCB, the SD-card-connector, this might have been pre-assembled for you. Then we do the resistors, and the diodes by bending them into shape.