Difference between revisions of "3d-printer-compare"
Jump to navigation
Jump to search
m |
|||
Line 8: | Line 8: | ||
!Cartesio W1CE | !Cartesio W1CE | ||
!Lulzbot TAZ 4 | !Lulzbot TAZ 4 | ||
+ | !Ultimaker II | ||
|- | |- | ||
|Price | |Price | ||
Line 13: | Line 14: | ||
|3600 | |3600 | ||
|2195 | |2195 | ||
+ | |€ 2300 incl. BTW | ||
|- | |- | ||
|PLA | |PLA | ||
− | | | + | |YES |
|x | |x | ||
− | | | + | |YES |
+ | |YES | ||
|- | |- | ||
|ABS | |ABS | ||
− | | | + | |YES |
|x | |x | ||
− | | | + | |YES |
+ | |YES | ||
|- | |- | ||
|PVA | |PVA | ||
− | | | + | |YES |
|x | |x | ||
− | | | + | |YES |
+ | |? | ||
|- | |- | ||
|Filament Diameter | |Filament Diameter | ||
− | | | + | |3 mm |
− | | | + | |3 mm |
− | | | + | |3 mm |
+ | |2.85 mm | ||
|- | |- | ||
|Filament Temp | |Filament Temp | ||
− | |150 tot 250 | + | |150 tot 250 °C |
|x | |x | ||
− | |max 240 | + | |max 240 °C |
+ | |180 - 260 °C | ||
|- | |- | ||
|File support | |File support | ||
|stl, obj, gcode | |stl, obj, gcode | ||
|x | |x | ||
+ | | | ||
+ | |STL / OBJ / DAE / AMF | ||
|- | |- | ||
− | | | + | |Print speed |
− | | | + | | -180 mm/s |
− | | | + | | -150 mm/s |
− | | | + | | -200 mm/s |
+ | |30-300 mm/s | ||
|- | |- | ||
− | | | + | |Accuracy* |
|X,Y axis 0.0125 mm, Z axis 0.001 mm | |X,Y axis 0.0125 mm, Z axis 0.001 mm | ||
|0,28 mm | |0,28 mm | ||
|0,1 mm | |0,1 mm | ||
+ | |0.0125 mm (X,Y), 0.005 mm (Z) | ||
|- | |- | ||
− | |Stepper Motor | + | |Stepper Motor* |
|X, Y 42''48, 1.3A, Z 42''63, 1.5A | |X, Y 42''48, 1.3A, Z 42''63, 1.5A | ||
+ | |x | ||
|x | |x | ||
|x | |x | ||
|- | |- | ||
− | |Controller | + | |Controller* |
|Arduino Mega 2560 R3 | |Arduino Mega 2560 R3 | ||
|x | |x | ||
|open source | |open source | ||
+ | |YES | ||
|- | |- | ||
|Linux | |Linux | ||
− | | | + | |YES |
|x | |x | ||
− | | | + | |YES |
+ | |YES | ||
|- | |- | ||
|Software | |Software | ||
Line 72: | Line 86: | ||
|x | |x | ||
|x | |x | ||
+ | |Cura | ||
|- | |- | ||
|Extruders | |Extruders | ||
Line 77: | Line 92: | ||
|max 4 | |max 4 | ||
|max 1 | |max 1 | ||
+ | | | ||
|- | |- | ||
− | |Max. print | + | |Max. print dimensions |
|250×250×300 mm | |250×250×300 mm | ||
|400x200x200 mm | |400x200x200 mm | ||
|297x274x248 mm | |297x274x248 mm | ||
+ | |230x225x205 mm | ||
|- | |- | ||
|Extrude Nozzle | |Extrude Nozzle | ||
Line 87: | Line 104: | ||
|x | |x | ||
|0.075mm to 0.35mm | |0.075mm to 0.35mm | ||
+ | |0.4 mm | ||
|- | |- | ||
|Hot bed | |Hot bed | ||
− | | | + | |YES |
|x | |x | ||
− | | | + | |YES |
+ | |50-100 °C | ||
|- | |- | ||
|Bed materiaal | |Bed materiaal | ||
− | |Monocrystal | + | |Monocrystal glass |
|x | |x | ||
|Borosilicate glass bed covered with PET film | |Borosilicate glass bed covered with PET film | ||
+ | |glass | ||
|- | |- | ||
− | | | + | |Closed printing area |
|Ja | |Ja | ||
|Ja | |Ja | ||
|Nee | |Nee | ||
+ | |closed sides, open front/top | ||
|- | |- | ||
− | | | + | |External dimensions |
− | | | + | |380x420x530 mm |
|x | |x | ||
− | | | + | |680x520x515 mm |
+ | |492x342x558 mm (incl. filament) | ||
|- | |- | ||
− | | | + | |Weight* |
|25kg | |25kg | ||
|x | |x | ||
|11kg | |11kg | ||
+ | |YES | ||
|- | |- | ||
− | | | + | |Notes |
|x | |x | ||
|Graveert ook | |Graveert ook | ||
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex | |Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex | ||
+ | | | ||
|- | |- | ||
|Link | |Link | ||
Line 122: | Line 146: | ||
|http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled | |http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled | ||
|https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer | |https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer | ||
+ | |https://www.ultimaker.com/pages/our-printers/ultimaker-2 | ||
|} | |} | ||
x = niet bekend | x = niet bekend | ||
+ | * = unreliable or irrelevant specification |
Revision as of 14:19, 14 May 2014
3D printer vergelijking
Besproken op de metameet van 13x05x2014. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.
Mankati Fullscale XT | Cartesio W1CE | Lulzbot TAZ 4 | Ultimaker II | |
---|---|---|---|---|
Price | 2150 | 3600 | 2195 | € 2300 incl. BTW |
PLA | YES | x | YES | YES |
ABS | YES | x | YES | YES |
PVA | YES | x | YES | ? |
Filament Diameter | 3 mm | 3 mm | 3 mm | 2.85 mm |
Filament Temp | 150 tot 250 °C | x | max 240 °C | 180 - 260 °C |
File support | stl, obj, gcode | x | STL / OBJ / DAE / AMF | |
Print speed | -180 mm/s | -150 mm/s | -200 mm/s | 30-300 mm/s |
Accuracy* | X,Y axis 0.0125 mm, Z axis 0.001 mm | 0,28 mm | 0,1 mm | 0.0125 mm (X,Y), 0.005 mm (Z) |
Stepper Motor* | X, Y 4248, 1.3A, Z 4263, 1.5A | x | x | x |
Controller* | Arduino Mega 2560 R3 | x | open source | YES |
Linux | YES | x | YES | YES |
Software | MankatiUM (Based on Cura) | x | x | Cura |
Extruders | max 2 | max 4 | max 1 | |
Max. print dimensions | 250×250×300 mm | 400x200x200 mm | 297x274x248 mm | 230x225x205 mm |
Extrude Nozzle | 0,4 mm (0,3 en 0,5 beschikbaar) | x | 0.075mm to 0.35mm | 0.4 mm |
Hot bed | YES | x | YES | 50-100 °C |
Bed materiaal | Monocrystal glass | x | Borosilicate glass bed covered with PET film | glass |
Closed printing area | Ja | Ja | Nee | closed sides, open front/top |
External dimensions | 380x420x530 mm | x | 680x520x515 mm | 492x342x558 mm (incl. filament) |
Weight* | 25kg | x | 11kg | YES |
Notes | x | Graveert ook | Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex | |
Link | http://www.mankati.com/fullscale-xt.html | http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled | https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer | https://www.ultimaker.com/pages/our-printers/ultimaker-2 |
x = niet bekend
- = unreliable or irrelevant specification