Difference between revisions of "3d-printer-compare"
Jump to navigation
Jump to search
(Created page with "https://www.lulzbot.com - LULZBOT TAZ 4 (gert) http://www.mankati.com/fullscale-xt1.html MANAKI FULLSCALE XT (ridix) http://mauk.cc/ CartesioW1CE (xander) http://formlabs.com/...") |
m (→Mogelijke printers) |
||
(29 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
− | + | = 3D printer vergelijking = | |
− | http://www.mankati.com/fullscale- | + | |
− | http://mauk.cc/ | + | == Onze eisen == |
− | http:// | + | {|class="wikitable" |
+ | !Parameter | ||
+ | !Value | ||
+ | |- | ||
+ | |Available budget | ||
+ | | € 2500 (?) | ||
+ | |- | ||
+ | |Minimum Maximum print dimensions | ||
+ | | 180 x 180 x 180 mm | ||
+ | |- | ||
+ | |Usable materials | ||
+ | |ABS & PLA | ||
+ | |- | ||
+ | |Filament Availability | ||
+ | | Use generic 1.75 or 3mm filament | ||
+ | |- | ||
+ | |Surface roughness / print accuracy* | ||
+ | | better than 0.5 mm (at least!) | ||
+ | |- | ||
+ | |Heated bed | ||
+ | | Yes | ||
+ | |- | ||
+ | |Factory build | ||
+ | | Yes, ensures we have warranty for at least 2 years | ||
+ | |- | ||
+ | |Spare parts | ||
+ | | It must be possible to have the machine repaired for at least 4 years after purchase, even after warranty expired (this may be too long, what is a realistic technical lifespan of a 3D-printer?) | ||
+ | |- | ||
+ | |OS support for printing software | ||
+ | | Linux | ||
+ | |} | ||
+ | |||
+ | == Onze wensen == | ||
+ | *Open source hardware en software | ||
+ | *Dual extruders | ||
+ | *heated bed up to 115 deg C | ||
+ | *automatic calibration | ||
+ | *automatic bed leveling or very easy manual leveling | ||
+ | |||
+ | == Mogelijke printers == | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | Besproken op de [[MetaMeeting14x05x13]]. | ||
+ | |||
+ | {|class="wikitable" | ||
+ | ! | ||
+ | !Mankati Fullscale XT | ||
+ | !Cartesio W1CE | ||
+ | !Lulzbot TAZ 4 | ||
+ | !Ultimaker II | ||
+ | !Deltamaker | ||
+ | !Renkforce RF1000 | ||
+ | !PP3DP 3D printer Up! Mini | ||
+ | !Robo R1 | ||
+ | |- | ||
+ | |Prijs | ||
+ | |€2150 | ||
+ | |€3600 | ||
+ | |€2195 | ||
+ | |€2300 incl. BTW | ||
+ | |$2400 | ||
+ | |€1999 (built);€1599 (kit) | ||
+ | |€639 (built) | ||
+ | |€799 (build) | ||
+ | |- | ||
+ | |PLA | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |X | ||
+ | |YES | ||
+ | |- | ||
+ | |ABS | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |? | ||
+ | |YES | ||
+ | |YES | ||
+ | |YES | ||
+ | |- | ||
+ | |PVA | ||
+ | |YES | ||
+ | |X | ||
+ | |YES | ||
+ | |? | ||
+ | |? | ||
+ | |? | ||
+ | |X | ||
+ | |X | ||
+ | |- | ||
+ | |Other materials | ||
+ | | | ||
+ | |XT, PP, PC, BioFilla, Arnitel ECO, NinjaFlex | ||
+ | |nylon, Laywood, Laybrick & Ninjaflex | ||
+ | |nylon, Laywood, Laybrick & Ninjaflex | ||
+ | | | ||
+ | |Laywood, PET, , Polyamid (nylon) | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |Filament reel price (weight) | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |€38 - 42 (0.75 kg) | ||
+ | |$39 (1 kg) | ||
+ | |€45 (2.1 kg) | ||
+ | |€39 (0.7 kg) | ||
+ | |€20 (1.0 kg) | ||
+ | |- | ||
+ | |Filament Diameter | ||
+ | |3 mm | ||
+ | |3 mm | ||
+ | |3 mm | ||
+ | |2.85 mm | ||
+ | |1.75 mm | ||
+ | |1.75 mm | ||
+ | |1.75 mm | ||
+ | |1.75 mm | ||
+ | |- | ||
+ | |Filament Temp | ||
+ | |150 tot 250 °C | ||
+ | |x | ||
+ | |max 240 °C | ||
+ | |180 - 260 °C | ||
+ | | | ||
+ | |x | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |File support | ||
+ | |stl, obj, gcode | ||
+ | |x | ||
+ | | | ||
+ | |STL / OBJ / DAE / AMF | ||
+ | | | ||
+ | | | ||
+ | |STL | ||
+ | |STL (SD-Card) | ||
+ | |- | ||
+ | |Print speed | ||
+ | | -180 mm/s | ||
+ | | -200mm/sec, 100 micron (Filament 1.75mm, Nozzle 0.4mm) | ||
+ | | -200 mm/s | ||
+ | |30-300 mm/s | ||
+ | | | ||
+ | | | ||
+ | | 9min per cm3 | ||
+ | | | ||
+ | |- | ||
+ | |Accuracy* | ||
+ | |X,Y axis 0.0125 mm, Z axis 0.001 mm | ||
+ | |0,28 mm | ||
+ | |0,1 mm | ||
+ | |0.0125 mm (X,Y), 0.005 mm (Z) | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |Stepper Motor* | ||
+ | |X, Y 42''48, 1.3A, Z 42''63, 1.5A | ||
+ | |x | ||
+ | |x | ||
+ | |x | ||
+ | |x | ||
+ | |x | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |Controller* | ||
+ | |Arduino Mega 2560 R3 | ||
+ | |Marlin for Cartesio | ||
+ | |open source | ||
+ | |YES | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |Arduino Mega 2560 + RAMPS 1.4 | ||
+ | |- | ||
+ | |Linux | ||
+ | |YES | ||
+ | |x | ||
+ | |YES | ||
+ | |YES | ||
+ | | | ||
+ | |Yes | ||
+ | | | ||
+ | | YES | ||
+ | |- | ||
+ | |Software | ||
+ | |MankatiUM (Based on Cura) | ||
+ | |all open source packages and other | ||
+ | |x | ||
+ | |Cura | ||
+ | |Marlin, OctoPrint, Repetier Host, and Slic3r | ||
+ | |Linux drivers (FWIW) | ||
+ | | | ||
+ | |Cura, Printrun/Pronterface, Octoprint | ||
+ | |- | ||
+ | |Extruders | ||
+ | |max 2 | ||
+ | |max 4 | ||
+ | |max 1 | ||
+ | | | ||
+ | |1 | ||
+ | |1 | ||
+ | |1 | ||
+ | |1 | ||
+ | |- | ||
+ | |Max. print dimensions | ||
+ | |250×250×300 mm | ||
+ | |410x210x200 mm | ||
+ | |297x274x248 mm | ||
+ | |230x225x205 mm | ||
+ | |254Øx278 mm | ||
+ | |250x235x175 mm | ||
+ | |120x120x120 mm | ||
+ | |254x228.6x203.2 mm | ||
+ | |- | ||
+ | |Extrude Nozzle | ||
+ | |0.4 mm (0.3 en 0.5 beschikbaar) | ||
+ | |0.25, 0.3, 0.35, 0.4 (standard), 0.6, 0.8 mm | ||
+ | |0.075 mm to 0.35 mm | ||
+ | |0.4 mm | ||
+ | | | ||
+ | |0.5 mm | ||
+ | |0.2 mm to 0.35 mm | ||
+ | |0.4 mm | ||
+ | |- | ||
+ | |Hot bed | ||
+ | |YES | ||
+ | |150 °C (optional 150 °C glass plate) | ||
+ | |YES | ||
+ | |50-100 °C | ||
+ | | | ||
+ | |YES, changeable | ||
+ | |YES 50 °C | ||
+ | |YES | ||
+ | |- | ||
+ | |Bed materiaal | ||
+ | |Monocrystal glass | ||
+ | |optional 150 °C glass plate | ||
+ | |Borosilicate glass bed covered with PET film | ||
+ | |glass | ||
+ | | | ||
+ | |Ceramic | ||
+ | | | ||
+ | |YES | ||
+ | |- | ||
+ | |Closed printing area | ||
+ | |Ja | ||
+ | |Ja | ||
+ | |Nee | ||
+ | |closed sides, open front/top | ||
+ | |No, completely open | ||
+ | |No, open back and front | ||
+ | |YES | ||
+ | |Semi-closed | ||
+ | |- | ||
+ | |External dimensions (wxdxh) | ||
+ | |380x420x530 mm | ||
+ | |710x530x610 mm | ||
+ | |680x520x515 mm | ||
+ | |492x342x558 mm (incl. filament) | ||
+ | | | ||
+ | |375x410x500 mm | ||
+ | |245x260x250 mm | ||
+ | |381x558x464 mm | ||
+ | |- | ||
+ | |Weight* | ||
+ | |25 kg | ||
+ | |29 kg | ||
+ | |11 kg | ||
+ | |YES | ||
+ | | | ||
+ | |16.5 kg | ||
+ | |5 kg | ||
+ | |11.65 kg | ||
+ | |- | ||
+ | |- | ||
+ | |Notes | ||
+ | |Mankati is via Rix | ||
+ | |Graveert ook, "zit in maasstricht" | ||
+ | |Open source hardware & software | ||
+ | |Open source hardware & software | ||
+ | | | ||
+ | |Waarschijnlijk beter om een opgebouwde versie te kopen (garantie etc) | ||
+ | Dikte druklaag (min.): 0.05 mm | ||
+ | Dikte druklaag (max.): 0.4 mm | ||
+ | Interfaces: USB 2.0 | ||
+ | Kleur: Zilver (gesatineerd) | ||
+ | Stroomverbruik (max.): 620 W | ||
+ | Materiaal behuizing: Aluminium, staal | ||
+ | SD-slot | ||
+ | |Hugely tiny print area | ||
+ | |Bestelbaar via ridix, 1 jaar garantie. | ||
+ | Auto bed leveling | ||
+ | |- | ||
+ | |Link | ||
+ | |http://www.mankati.com/fullscale-xt.html | ||
+ | |http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled http://mauk.cc/webshop/Cartesio-systems/Cartesio-W-system | ||
+ | |https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer | ||
+ | |https://www.ultimaker.com/pages/our-printers/ultimaker-2 | ||
+ | |http://www.deltamaker.com/ | ||
+ | |https://www.conrad.nl/nl/renkforce-rf1000-3d-printer-1007508.html | ||
+ | |http://www.bcc.nl/computer/printer-en-scanner/3d-printer/pp3dp-3d-printer-up--mini(76151) | ||
+ | |http://www.ridix.nl/r1-robo-3d-printer-plaabs-model-p-17053.html | ||
+ | |} | ||
+ | |||
+ | x = niet bekend | ||
+ | |||
+ | <nowiki>*</nowiki> = unreliable or irrelevant specification |
Latest revision as of 09:32, 23 March 2015
3D printer vergelijking
Onze eisen
Parameter | Value |
---|---|
Available budget | € 2500 (?) |
Minimum Maximum print dimensions | 180 x 180 x 180 mm |
Usable materials | ABS & PLA |
Filament Availability | Use generic 1.75 or 3mm filament |
Surface roughness / print accuracy* | better than 0.5 mm (at least!) |
Heated bed | Yes |
Factory build | Yes, ensures we have warranty for at least 2 years |
Spare parts | It must be possible to have the machine repaired for at least 4 years after purchase, even after warranty expired (this may be too long, what is a realistic technical lifespan of a 3D-printer?) |
OS support for printing software | Linux |
Onze wensen
- Open source hardware en software
- Dual extruders
- heated bed up to 115 deg C
- automatic calibration
- automatic bed leveling or very easy manual leveling
Mogelijke printers
Besproken op de MetaMeeting14x05x13.
Mankati Fullscale XT | Cartesio W1CE | Lulzbot TAZ 4 | Ultimaker II | Deltamaker | Renkforce RF1000 | PP3DP 3D printer Up! Mini | Robo R1 | |
---|---|---|---|---|---|---|---|---|
Prijs | €2150 | €3600 | €2195 | €2300 incl. BTW | $2400 | €1999 (built);€1599 (kit) | €639 (built) | €799 (build) |
PLA | YES | YES | YES | YES | YES | YES | X | YES |
ABS | YES | YES | YES | YES | ? | YES | YES | YES |
PVA | YES | X | YES | ? | ? | ? | X | X |
Other materials | XT, PP, PC, BioFilla, Arnitel ECO, NinjaFlex | nylon, Laywood, Laybrick & Ninjaflex | nylon, Laywood, Laybrick & Ninjaflex | Laywood, PET, , Polyamid (nylon) | ||||
Filament reel price (weight) | €38 - 42 (0.75 kg) | $39 (1 kg) | €45 (2.1 kg) | €39 (0.7 kg) | €20 (1.0 kg) | |||
Filament Diameter | 3 mm | 3 mm | 3 mm | 2.85 mm | 1.75 mm | 1.75 mm | 1.75 mm | 1.75 mm |
Filament Temp | 150 tot 250 °C | x | max 240 °C | 180 - 260 °C | x | |||
File support | stl, obj, gcode | x | STL / OBJ / DAE / AMF | STL | STL (SD-Card) | |||
Print speed | -180 mm/s | -200mm/sec, 100 micron (Filament 1.75mm, Nozzle 0.4mm) | -200 mm/s | 30-300 mm/s | 9min per cm3 | |||
Accuracy* | X,Y axis 0.0125 mm, Z axis 0.001 mm | 0,28 mm | 0,1 mm | 0.0125 mm (X,Y), 0.005 mm (Z) | ||||
Stepper Motor* | X, Y 4248, 1.3A, Z 4263, 1.5A | x | x | x | x | x | ||
Controller* | Arduino Mega 2560 R3 | Marlin for Cartesio | open source | YES | Arduino Mega 2560 + RAMPS 1.4 | |||
Linux | YES | x | YES | YES | Yes | YES | ||
Software | MankatiUM (Based on Cura) | all open source packages and other | x | Cura | Marlin, OctoPrint, Repetier Host, and Slic3r | Linux drivers (FWIW) | Cura, Printrun/Pronterface, Octoprint | |
Extruders | max 2 | max 4 | max 1 | 1 | 1 | 1 | 1 | |
Max. print dimensions | 250×250×300 mm | 410x210x200 mm | 297x274x248 mm | 230x225x205 mm | 254Øx278 mm | 250x235x175 mm | 120x120x120 mm | 254x228.6x203.2 mm |
Extrude Nozzle | 0.4 mm (0.3 en 0.5 beschikbaar) | 0.25, 0.3, 0.35, 0.4 (standard), 0.6, 0.8 mm | 0.075 mm to 0.35 mm | 0.4 mm | 0.5 mm | 0.2 mm to 0.35 mm | 0.4 mm | |
Hot bed | YES | 150 °C (optional 150 °C glass plate) | YES | 50-100 °C | YES, changeable | YES 50 °C | YES | |
Bed materiaal | Monocrystal glass | optional 150 °C glass plate | Borosilicate glass bed covered with PET film | glass | Ceramic | YES | ||
Closed printing area | Ja | Ja | Nee | closed sides, open front/top | No, completely open | No, open back and front | YES | Semi-closed |
External dimensions (wxdxh) | 380x420x530 mm | 710x530x610 mm | 680x520x515 mm | 492x342x558 mm (incl. filament) | 375x410x500 mm | 245x260x250 mm | 381x558x464 mm | |
Weight* | 25 kg | 29 kg | 11 kg | YES | 16.5 kg | 5 kg | 11.65 kg | |
Notes | Mankati is via Rix | Graveert ook, "zit in maasstricht" | Open source hardware & software | Open source hardware & software | Waarschijnlijk beter om een opgebouwde versie te kopen (garantie etc)
Dikte druklaag (min.): 0.05 mm Dikte druklaag (max.): 0.4 mm Interfaces: USB 2.0 Kleur: Zilver (gesatineerd) Stroomverbruik (max.): 620 W Materiaal behuizing: Aluminium, staal SD-slot |
Hugely tiny print area | Bestelbaar via ridix, 1 jaar garantie.
Auto bed leveling | |
Link | http://www.mankati.com/fullscale-xt.html | http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled http://mauk.cc/webshop/Cartesio-systems/Cartesio-W-system | https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer | https://www.ultimaker.com/pages/our-printers/ultimaker-2 | http://www.deltamaker.com/ | https://www.conrad.nl/nl/renkforce-rf1000-3d-printer-1007508.html | http://www.bcc.nl/computer/printer-en-scanner/3d-printer/pp3dp-3d-printer-up--mini(76151) | http://www.ridix.nl/r1-robo-3d-printer-plaabs-model-p-17053.html |
x = niet bekend
* = unreliable or irrelevant specification