Difference between revisions of "3d-printer-compare"

From RevSpace
Jump to: navigation, search
(Put Renkforce in the table; some of the spec's seem inconsistent)
m (Added conrad link for Renkforce RF1000 + changed the price)
Line 41: Line 41:
 
|€2300 incl. BTW
 
|€2300 incl. BTW
 
|$2400
 
|$2400
|€1600
+
|€1999 (built)
 +
€1599 (kit)
 
|-
 
|-
 
|PLA
 
|PLA
Line 81: Line 82:
 
|€38 - 42 (0.75 kg)
 
|€38 - 42 (0.75 kg)
 
|$39 (1 kg)
 
|$39 (1 kg)
|
+
|€45 (2.1 kg)
 
|-
 
|-
 
|Filament Diameter
 
|Filament Diameter
Line 168: Line 169:
 
|230x225x205 mm
 
|230x225x205 mm
 
|254Øx278 mm
 
|254Øx278 mm
|230x245x200 mm  
+
|250x235x175 mm
 
|-
 
|-
 
|Extrude Nozzle
 
|Extrude Nozzle
Line 192: Line 193:
 
|glass
 
|glass
 
|
 
|
|
+
|Ceramic
 
|-
 
|-
 
|Closed printing area
 
|Closed printing area
Line 200: Line 201:
 
|closed sides, open front/top
 
|closed sides, open front/top
 
|No, completely open
 
|No, completely open
|
+
|No, open back and front
 
|-
 
|-
 
|External dimensions (wxdxh)
 
|External dimensions (wxdxh)
Line 225: Line 226:
 
|Open source hardware & software,
 
|Open source hardware & software,
 
|
 
|
|Dikte druklaag (min.): 0.05 mm  
+
|Waarschijnlijk beter om een opgebouwde versie te kopen (garantie etc)
 +
Dikte druklaag (min.): 0.05 mm  
 
Dikte druklaag (max.): 0.4 mm  
 
Dikte druklaag (max.): 0.4 mm  
Uitvoering: Bouwpakket (kant en klaar kost €400 meer) 
 
 
Interfaces: USB 2.0   
 
Interfaces: USB 2.0   
 
Kleur: Zilver (gesatineerd)   
 
Kleur: Zilver (gesatineerd)   
Line 240: Line 241:
 
|https://www.ultimaker.com/pages/our-printers/ultimaker-2
 
|https://www.ultimaker.com/pages/our-printers/ultimaker-2
 
|http://www.deltamaker.com/
 
|http://www.deltamaker.com/
|?
+
|https://www.conrad.nl/nl/renkforce-rf1000-3d-printer-1007508.html
 
|}
 
|}
  

Revision as of 12:32, 9 February 2015

3D printer vergelijking

Onze eisen

Parameter Value
Aanschafwaarde € ?
Minimum Maximum print dimensions  ? x ? x ? mm
Usable materials ABS, PLA, ?
Surface roughness / print accuracy* better than 0.5 mm (at least!)

Mogelijke printers

Besproken op de MetaMeeting14x05x13.

Mankati Fullscale XT Cartesio W1CE Lulzbot TAZ 4 Ultimaker II Deltamaker Renkforce RF1000
Prijs €2150 €3600 €2195 €2300 incl. BTW $2400 €1999 (built)

€1599 (kit)

PLA YES x YES YES YES YES
ABS YES x YES YES ? YES
PVA YES x YES ? ? ?
Other materials nylon, Laywood, Laybrick & Ninjaflex nylon, Laywood, Laybrick & Ninjaflex Laywood, PET, , Polyamid (nylon)
Filament reel price (weight) €38 - 42 (0.75 kg) $39 (1 kg) €45 (2.1 kg)
Filament Diameter 3 mm 3 mm 3 mm 2.85 mm 1.75 mm
Filament Temp 150 tot 250 °C x max 240 °C 180 - 260 °C x
File support stl, obj, gcode x STL / OBJ / DAE / AMF
Print speed -180 mm/s -150 mm/s -200 mm/s 30-300 mm/s
Accuracy* X,Y axis 0.0125 mm, Z axis 0.001 mm 0,28 mm 0,1 mm 0.0125 mm (X,Y), 0.005 mm (Z)
Stepper Motor* X, Y 4248, 1.3A, Z 4263, 1.5A x x x x x
Controller* Arduino Mega 2560 R3 x open source YES
Linux YES x YES YES Yes
Software MankatiUM (Based on Cura) x x Cura Marlin, OctoPrint, Repetier Host, and Slic3r Linux drivers (FWIW)
Extruders max 2 max 4 max 1 1 1
Max. print dimensions 250×250×300 mm 400x200x200 mm 297x274x248 mm 230x225x205 mm 254Øx278 mm 250x235x175 mm
Extrude Nozzle 0,4 mm (0,3 en 0,5 beschikbaar) ? 0.075mm to 0.35mm 0.4 mm 0.5 mm
Hot bed YES x YES 50-100 °C YES, changeable
Bed materiaal Monocrystal glass x Borosilicate glass bed covered with PET film glass Ceramic
Closed printing area Ja Ja Nee closed sides, open front/top No, completely open No, open back and front
External dimensions (wxdxh) 380x420x530 mm x 680x520x515 mm 492x342x558 mm (incl. filament) 375x410x500 mm
Weight* 25 kg x 11 kg YES 16.5 kg
Notes Mankati is via Rix Graveert ook, "zit in maasstricht" Open source hardware & software, Open source hardware & software, Waarschijnlijk beter om een opgebouwde versie te kopen (garantie etc)

Dikte druklaag (min.): 0.05 mm Dikte druklaag (max.): 0.4 mm Interfaces: USB 2.0 Kleur: Zilver (gesatineerd) Stroomverbruik (max.): 620 W Materiaal behuizing: Aluminium, staal SD-slot

Link http://www.mankati.com/fullscale-xt.html http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer https://www.ultimaker.com/pages/our-printers/ultimaker-2 http://www.deltamaker.com/ https://www.conrad.nl/nl/renkforce-rf1000-3d-printer-1007508.html

x = niet bekend

* = unreliable or irrelevant specification