3d-printer-compare: Difference between revisions

From RevSpace
Jump to navigation Jump to search
(Put Renkforce in the table; some of the spec's seem inconsistent)
Line 21: Line 21:
== Mogelijke printers ==
== Mogelijke printers ==


EDIT: De Renkforce RF1000 ziet er niet heel verkeerd uit, heeft Linux drivers, groot printvolume en kost €1500 (in DE, NL = €1600). Er zijn veel verschillende materialen bruikbaar.


Dikte druklaag (min.): 0.05 mm
Dikte druklaag (max.): 0.4 mm
Breedte: 375 mm
Extrudertype: Single 
Uitvoering: Bouwpakket (kant en klaar kost €400 meer) 
Drukdiepte (Z) max.: 230 mm
Drukbreedte (X) max.: 245 mm
Hoogte: 500 mm
Mondstuk-Ø: 0.5 mm
Ondersteund filament: ABS, Laywood, PET, PLA, Polyamid
Interfaces: USB 2.0 
Kleur: Zilver (gesatineerd) 
Stroomverbruik (max.): 620 W
Materiaal behuizing: Aluminium, staal 
Gewicht: 16.5 kg
Diepte: 410 mm
SD-slot: Ja 
Drukhoogte (Y) max.: 200 mm
Printbed eigenschappen: Verwarmd, Verwisselbaar




Besproken op de [[MetaMeeting14x05x13]]. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.
Besproken op de [[MetaMeeting14x05x13]].  


{|class="wikitable"
{|class="wikitable"
Line 53: Line 33:
!Ultimaker II
!Ultimaker II
!Deltamaker
!Deltamaker
!Renkforce RF1000
|-
|-
|Prijs
|Prijs
|€2150,-
|€2150
|€3600,-
|€3600
|€2195,-
|€2195
|€2300,- incl. BTW
|€2300 incl. BTW
|$2400
|$2400
|€1600
|-
|-
|PLA
|PLA
|YES
|YES
|x
|x
|YES
|YES
|YES
|YES
|YES
Line 74: Line 57:
|YES
|YES
|?
|?
|YES
|-
|-
|PVA
|PVA
Line 79: Line 63:
|x
|x
|YES
|YES
|?
|?
|?
|?
|?
|-
|Other materials
|
|
|nylon, Laywood, Laybrick & Ninjaflex
|nylon, Laywood, Laybrick & Ninjaflex
|
|Laywood, PET, , Polyamid (nylon)
|-
|-
|Filament reel price (weight)
|Filament reel price (weight)
Line 88: Line 81:
|€38 - 42 (0.75 kg)
|€38 - 42 (0.75 kg)
|$39 (1 kg)
|$39 (1 kg)
|
|-
|-
|Filament Diameter
|Filament Diameter
Line 102: Line 96:
|180 - 260 °C
|180 - 260 °C
|
|
|x
|-
|-
|File support
|File support
Line 108: Line 103:
|
|
|STL / OBJ / DAE / AMF
|STL / OBJ / DAE / AMF
|
|
|
|-
|-
Line 115: Line 111:
| -200 mm/s
| -200 mm/s
|30-300 mm/s
|30-300 mm/s
|
|
|
|-
|-
Line 122: Line 119:
|0,1 mm
|0,1 mm
|0.0125 mm (X,Y), 0.005 mm (Z)
|0.0125 mm (X,Y), 0.005 mm (Z)
|
|
|
|-
|-
Line 129: Line 127:
|x
|x
|x
|x
|
|x
|x
|-
|-
|Controller*
|Controller*
Line 136: Line 135:
|open source
|open source
|YES
|YES
|
|
|-
|-
|Linux
|Linux
Line 143: Line 144:
|YES
|YES
|
|
|Yes
|-
|-
|Software
|Software
Line 150: Line 152:
|Cura
|Cura
|Marlin, OctoPrint, Repetier Host, and Slic3r
|Marlin, OctoPrint, Repetier Host, and Slic3r
|Linux drivers (FWIW)
|-
|-
|Extruders
|Extruders
Line 156: Line 159:
|max 1
|max 1
|
|
|1
|1
|1
|-
|-
Line 163: Line 167:
|297x274x248 mm
|297x274x248 mm
|230x225x205 mm
|230x225x205 mm
|254Øx278mm
|254Øx278 mm
|230x245x200 mm
|-
|-
|Extrude Nozzle
|Extrude Nozzle
Line 171: Line 176:
|0.4 mm
|0.4 mm
|
|
|0.5 mm
|-
|-
|Hot bed
|Hot bed
Line 178: Line 184:
|50-100 °C
|50-100 °C
|
|
|YES, changeable
|-
|-
|Bed materiaal
|Bed materiaal
Line 184: Line 191:
|Borosilicate glass bed covered with PET film
|Borosilicate glass bed covered with PET film
|glass
|glass
|
|
|
|-
|-
Line 192: Line 200:
|closed sides, open front/top
|closed sides, open front/top
|No, completely open
|No, completely open
|
|-
|-
|External dimensions
|External dimensions (wxdxh)
|380x420x530 mm
|380x420x530 mm
|x
|x
Line 199: Line 208:
|492x342x558 mm (incl. filament)
|492x342x558 mm (incl. filament)
|
|
|375x410x500 mm
|-
|-
|Weight*
|Weight*
|25kg
|25 kg
|x
|x
|11kg
|11 kg
|YES
|YES
|
|16.5 kg
|-
|-
|-
|-
|Notes
|Notes
|x
|Mankati is via Rix
|Graveert ook
|Graveert ook, "zit in maasstricht"
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|Open source hardware & software,  
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|Open source hardware & software,
|
|
|Dikte druklaag (min.): 0.05 mm
Dikte druklaag (max.): 0.4 mm
Uitvoering: Bouwpakket (kant en klaar kost €400 meer) 
Interfaces: USB 2.0 
Kleur: Zilver (gesatineerd) 
Stroomverbruik (max.): 620 W
Materiaal behuizing: Aluminium, staal 
SD-slot
|-
|-
|Link
|Link
Line 220: Line 240:
|https://www.ultimaker.com/pages/our-printers/ultimaker-2
|https://www.ultimaker.com/pages/our-printers/ultimaker-2
|http://www.deltamaker.com/
|http://www.deltamaker.com/
|?
|}
|}


Revision as of 08:59, 9 February 2015

3D printer vergelijking

Onze eisen

Parameter Value
Aanschafwaarde € ?
Minimum Maximum print dimensions ? x ? x ? mm
Usable materials ABS, PLA, ?
Surface roughness / print accuracy* better than 0.5 mm (at least!)

Mogelijke printers

Besproken op de MetaMeeting14x05x13.

Mankati Fullscale XT Cartesio W1CE Lulzbot TAZ 4 Ultimaker II Deltamaker Renkforce RF1000
Prijs €2150 €3600 €2195 €2300 incl. BTW $2400 €1600
PLA YES x YES YES YES YES
ABS YES x YES YES ? YES
PVA YES x YES ? ? ?
Other materials nylon, Laywood, Laybrick & Ninjaflex nylon, Laywood, Laybrick & Ninjaflex Laywood, PET, , Polyamid (nylon)
Filament reel price (weight) €38 - 42 (0.75 kg) $39 (1 kg)
Filament Diameter 3 mm 3 mm 3 mm 2.85 mm 1.75 mm
Filament Temp 150 tot 250 °C x max 240 °C 180 - 260 °C x
File support stl, obj, gcode x STL / OBJ / DAE / AMF
Print speed -180 mm/s -150 mm/s -200 mm/s 30-300 mm/s
Accuracy* X,Y axis 0.0125 mm, Z axis 0.001 mm 0,28 mm 0,1 mm 0.0125 mm (X,Y), 0.005 mm (Z)
Stepper Motor* X, Y 4248, 1.3A, Z 4263, 1.5A x x x x x
Controller* Arduino Mega 2560 R3 x open source YES
Linux YES x YES YES Yes
Software MankatiUM (Based on Cura) x x Cura Marlin, OctoPrint, Repetier Host, and Slic3r Linux drivers (FWIW)
Extruders max 2 max 4 max 1 1 1
Max. print dimensions 250×250×300 mm 400x200x200 mm 297x274x248 mm 230x225x205 mm 254Øx278 mm 230x245x200 mm
Extrude Nozzle 0,4 mm (0,3 en 0,5 beschikbaar) ? 0.075mm to 0.35mm 0.4 mm 0.5 mm
Hot bed YES x YES 50-100 °C YES, changeable
Bed materiaal Monocrystal glass x Borosilicate glass bed covered with PET film glass
Closed printing area Ja Ja Nee closed sides, open front/top No, completely open
External dimensions (wxdxh) 380x420x530 mm x 680x520x515 mm 492x342x558 mm (incl. filament) 375x410x500 mm
Weight* 25 kg x 11 kg YES 16.5 kg
Notes Mankati is via Rix Graveert ook, "zit in maasstricht" Open source hardware & software, Open source hardware & software, Dikte druklaag (min.): 0.05 mm

Dikte druklaag (max.): 0.4 mm Uitvoering: Bouwpakket (kant en klaar kost €400 meer) Interfaces: USB 2.0 Kleur: Zilver (gesatineerd) Stroomverbruik (max.): 620 W Materiaal behuizing: Aluminium, staal SD-slot

Link http://www.mankati.com/fullscale-xt.html http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer https://www.ultimaker.com/pages/our-printers/ultimaker-2 http://www.deltamaker.com/ ?

x = niet bekend

* = unreliable or irrelevant specification

Retrieved from ‘https://revspace.nl/wiki/index.php?title=3d-printer-compare&oldid=6220’