Difference between revisions of "3d-printer-compare"
Jump to navigation
Jump to search
m |
m |
||
Line 1: | Line 1: | ||
− | + | = 3D printer vergelijking = | |
− | + | Besproken op de metameet van 13x05x2014. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend. | |
− | http://www.mankati.com/fullscale- | + | |
− | http://mauk.cc/ | + | {| |
− | + | ! | |
+ | !Mankati Fullscale XT | ||
+ | !Cartesio W1CE | ||
+ | !Lulzbot TAZ 4 | ||
+ | |- | ||
+ | |Price | ||
+ | |2150 | ||
+ | |3600 | ||
+ | |2195 | ||
+ | |- | ||
+ | |PLA | ||
+ | |Ja | ||
+ | |x | ||
+ | |Ja | ||
+ | |- | ||
+ | |ABS | ||
+ | |Ja | ||
+ | |x | ||
+ | |Ja | ||
+ | |- | ||
+ | |PVA | ||
+ | |Ja | ||
+ | |x | ||
+ | |Ja | ||
+ | |- | ||
+ | |Filament Diameter | ||
+ | |3mm | ||
+ | |3mm | ||
+ | |3mm | ||
+ | |- | ||
+ | |Filament Temp | ||
+ | |150 tot 250 Cel. | ||
+ | |x | ||
+ | |max 240 cel. | ||
+ | |- | ||
+ | |File support | ||
+ | |stl, obj, gcode | ||
+ | |x | ||
+ | |- | ||
+ | |Max print speed | ||
+ | |180mm/sec | ||
+ | |150mm/sec | ||
+ | |200mm/sec | ||
+ | |- | ||
+ | |Precision | ||
+ | |X,Y axis 0.0125 mm, Z axis 0.001 mm | ||
+ | |0,28 mm | ||
+ | |0,1 mm | ||
+ | |- | ||
+ | |Stepper Motor | ||
+ | |X, Y 42''48, 1.3A, Z 42''63, 1.5A | ||
+ | |x | ||
+ | |x | ||
+ | |- | ||
+ | |Controller | ||
+ | |Arduino Mega 2560 R3 | ||
+ | |x | ||
+ | |open source | ||
+ | |- | ||
+ | |Linux | ||
+ | |Ja | ||
+ | |x | ||
+ | |Ja | ||
+ | |- | ||
+ | |Software | ||
+ | |MankatiUM (Based on Cura) | ||
+ | |x | ||
+ | |x | ||
+ | |- | ||
+ | |Extruders | ||
+ | |max 2 | ||
+ | |max 4 | ||
+ | |max 1 | ||
+ | |- | ||
+ | |Max. print afmetingen | ||
+ | |250×250×300 mm | ||
+ | |400x200x200 mm | ||
+ | |297x274x248 mm | ||
+ | |- | ||
+ | |Extrude Nozzle | ||
+ | |0,4 mm (0,3 en 0,5 beschikbaar) | ||
+ | |x | ||
+ | |0.075mm to 0.35mm | ||
+ | |- | ||
+ | |Hot bed | ||
+ | |Ja | ||
+ | |x | ||
+ | |Ja | ||
+ | |- | ||
+ | |Bed materiaal | ||
+ | |Monocrystal glas | ||
+ | |x | ||
+ | |Borosilicate glass bed covered with PET film | ||
+ | |- | ||
+ | |Afgesloten | ||
+ | |Ja | ||
+ | |Ja | ||
+ | |Nee | ||
+ | |- | ||
+ | |Afmetingen printer | ||
+ | |380x420x530mm | ||
+ | |x | ||
+ | |680x520x515mm | ||
+ | |- | ||
+ | |Gewicht | ||
+ | |25kg | ||
+ | |x | ||
+ | |11kg | ||
+ | |- | ||
+ | |Opmerkingen | ||
+ | |x | ||
+ | |Graveert ook | ||
+ | |Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex | ||
+ | |- | ||
+ | |Link | ||
+ | |http://www.mankati.com/fullscale-xt.html | ||
+ | |http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled | ||
+ | |https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer | ||
+ | |} | ||
+ | |||
+ | x = niet bekend |
Revision as of 13:19, 14 May 2014
3D printer vergelijking
Besproken op de metameet van 13x05x2014. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.
Mankati Fullscale XT | Cartesio W1CE | Lulzbot TAZ 4 | |
---|---|---|---|
Price | 2150 | 3600 | 2195 |
PLA | Ja | x | Ja |
ABS | Ja | x | Ja |
PVA | Ja | x | Ja |
Filament Diameter | 3mm | 3mm | 3mm |
Filament Temp | 150 tot 250 Cel. | x | max 240 cel. |
File support | stl, obj, gcode | x | |
Max print speed | 180mm/sec | 150mm/sec | 200mm/sec |
Precision | X,Y axis 0.0125 mm, Z axis 0.001 mm | 0,28 mm | 0,1 mm |
Stepper Motor | X, Y 4248, 1.3A, Z 4263, 1.5A | x | x |
Controller | Arduino Mega 2560 R3 | x | open source |
Linux | Ja | x | Ja |
Software | MankatiUM (Based on Cura) | x | x |
Extruders | max 2 | max 4 | max 1 |
Max. print afmetingen | 250×250×300 mm | 400x200x200 mm | 297x274x248 mm |
Extrude Nozzle | 0,4 mm (0,3 en 0,5 beschikbaar) | x | 0.075mm to 0.35mm |
Hot bed | Ja | x | Ja |
Bed materiaal | Monocrystal glas | x | Borosilicate glass bed covered with PET film |
Afgesloten | Ja | Ja | Nee |
Afmetingen printer | 380x420x530mm | x | 680x520x515mm |
Gewicht | 25kg | x | 11kg |
Opmerkingen | x | Graveert ook | Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex |
Link | http://www.mankati.com/fullscale-xt.html | http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled | https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer |
x = niet bekend