3d-printer-compare: Difference between revisions

From RevSpace
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 1: Line 1:
Noot, WIP.
= 3D printer vergelijking =


https://www.lulzbot.com - LULZBOT TAZ 4 (gert)
Besproken op de metameet van 13x05x2014. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.
http://www.mankati.com/fullscale-xt1.html MANAKI FULLSCALE XT (ridix)
 
http://mauk.cc/ CartesioW1CE (xander)
{|
http://formlabs.com/ Form1 (gert)
!
!Mankati Fullscale XT
!Cartesio W1CE
!Lulzbot TAZ 4
|-
|Price
|2150
|3600
|2195
|-
|PLA
|Ja
|x
|Ja
|-
|ABS
|Ja
|x
|Ja
|-
|PVA
|Ja
|x
|Ja
|-
|Filament Diameter
|3mm
|3mm
|3mm
|-
|Filament Temp
|150 tot 250 Cel.
|x
|max 240 cel.
|-
|File support
|stl, obj, gcode
|x
|-
|Max print speed
|180mm/sec
|150mm/sec
|200mm/sec
|-
|Precision
|X,Y axis 0.0125 mm, Z axis 0.001 mm
|0,28 mm
|0,1 mm
|-
|Stepper Motor
|X, Y 42''48, 1.3A, Z 42''63, 1.5A
|x
|x
|-
|Controller
|Arduino Mega 2560 R3
|x
|open source
|-
|Linux
|Ja
|x
|Ja
|-
|Software
|MankatiUM (Based on Cura)
|x
|x
|-
|Extruders
|max 2
|max 4
|max 1
|-
|Max. print afmetingen
|250×250×300 mm
|400x200x200 mm
|297x274x248 mm
|-
|Extrude Nozzle
|0,4 mm (0,3 en 0,5 beschikbaar)
|x
|0.075mm to 0.35mm
|-
|Hot bed
|Ja
|x
|Ja
|-
|Bed materiaal
|Monocrystal glas
|x
|Borosilicate glass bed covered with PET film
|-
|Afgesloten
|Ja
|Ja
|Nee
|-
|Afmetingen printer
|380x420x530mm
|x
|680x520x515mm
|-
|Gewicht
|25kg
|x
|11kg
|-
|Opmerkingen
|x
|Graveert ook
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|-
|Link
|http://www.mankati.com/fullscale-xt.html
|http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled
|https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer
|}
 
x = niet bekend

Revision as of 12:19, 14 May 2014

3D printer vergelijking

Besproken op de metameet van 13x05x2014. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.

Mankati Fullscale XT Cartesio W1CE Lulzbot TAZ 4
Price 2150 3600 2195
PLA Ja x Ja
ABS Ja x Ja
PVA Ja x Ja
Filament Diameter 3mm 3mm 3mm
Filament Temp 150 tot 250 Cel. x max 240 cel.
File support stl, obj, gcode x
Max print speed 180mm/sec 150mm/sec 200mm/sec
Precision X,Y axis 0.0125 mm, Z axis 0.001 mm 0,28 mm 0,1 mm
Stepper Motor X, Y 4248, 1.3A, Z 4263, 1.5A x x
Controller Arduino Mega 2560 R3 x open source
Linux Ja x Ja
Software MankatiUM (Based on Cura) x x
Extruders max 2 max 4 max 1
Max. print afmetingen 250×250×300 mm 400x200x200 mm 297x274x248 mm
Extrude Nozzle 0,4 mm (0,3 en 0,5 beschikbaar) x 0.075mm to 0.35mm
Hot bed Ja x Ja
Bed materiaal Monocrystal glas x Borosilicate glass bed covered with PET film
Afgesloten Ja Ja Nee
Afmetingen printer 380x420x530mm x 680x520x515mm
Gewicht 25kg x 11kg
Opmerkingen x Graveert ook Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
Link http://www.mankati.com/fullscale-xt.html http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer

x = niet bekend